Can't watch 119 on one receiver while 110 on the other receiver at the same time, please help!!!

 

New member
Username: Onlyway2watch

Post Number: 1
Registered: Dec-07
I have dp 500 dish + dp twin lnb + coolsat4K & 5K. I have 2 cables running from the two lnb ports to the two receivers directly. Somehow, when I watch the 110 bird channel on one tv and the instant I tune the other tv to a 119 bird channel the picture will disappear on one of the tvs. And the picture will briefly alternate between the two tvs but never picture on both tvs at the same time. However, if both tvs were watching channels from the same bird then they were perfectly fine. I was told that it could be the lnb problem so I replaced the twin lnb with a dp quad lnb. The problem still remains. Am I missing something here? Any help appreciated.
My dish setting are:
lnb power: on
lnb type: ocs-dp
lnb freq: 11.250
22KHz: off
DiSEqC Switch: 1.0
committed: 2(110); 1(119)
legacy SW: off
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 2800
Registered: Sep-06
are you useing a disqc switch?

its one dish ANTENNA with a dish pro lnb?
 

New member
Username: Noloprez

Post Number: 2
Registered: Dec-07
Use a SW 21 instead of a DiseqC. Don't forget to change the settings in ur STB's menu.
 

Silver Member
Username: Kirankumar

Kenya

Post Number: 507
Registered: Oct-07
i think with dishpro twin lnb you might have to get a dp34 switch,but i might be wrong
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 2802
Registered: Sep-06
Lets all wait for john and take this one step at a time
 

New member
Username: Onlyway2watch

Post Number: 2
Registered: Dec-07
thanks guys. Mine is dishpro Twin Lnb and I'm not using any external switch. It's two coaxial running from the two ports of the lnb to the two receivers
 

New member
Username: Onlyway2watch

Post Number: 3
Registered: Dec-07
Mr Tester, it's a one dishpro 500 with a dp twin lnb
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 2809
Registered: Sep-06
If it is a Dish Pro then the settings by theory is

lnb type ocs-dp
disqc settings for 119-1 for 110-2

that being said...

I have here a dish 500 with dish pro connected to a pansat 3500.
That set up likes disqc settings 119-3 and 110-4

I have a customers that likes the tone burst better..

point is play with the settings some
might disconnect one receiver and get the other one working correctly then reconnect it.....might try reversing the ports on the lnb so the receivers are connected to a diferant port.


also some receivers will NOT play well together with that set up and you may need to get a DP34 switch.....matter of fact i have some info on a special set up for some receivers with that lnb i will go look that up...

sorry I am kinda scarterd brained tonight just had surgery on my arm and between the pain pills and typing one handed....

experiment some and post your results here
 

Silver Member
Username: One_eye_jack

Post Number: 176
Registered: Nov-07
john, first try this,connect one of your receivers
to SAT. OUT and leave the other receiver to
TV OUT if it don't work then re-align your dish.
 

Bronze Member
Username: Jaye50

Post Number: 45
Registered: Aug-07
i need some pain pills tft....i'm out....send me a couple.....
 

New member
Username: Onlyway2watch

Post Number: 4
Registered: Dec-07
Tried putting 3 and 4 for 119 & 120. Also tried switching ports to no avails. I neglected to mention that these two receivers worked at my previous home with the same lnb. However, at this house the signal level is only in the 60's on 119 for cs4k while in upper 80's-90's on 119 for the cs5k receiver. I did try to play around with the elevation/skew/rotation of the dish with my friend and that was the best signal that I was able to get. My zipcode is 95829 if anyone knows the settings please provide so I can double check them. BTW, FTA get well soon, we need your knowledge and dedication.
 

Silver Member
Username: One_eye_jack

Post Number: 178
Registered: Nov-07
Echo 7 @ 119.oW Dish Elevation 45.o
Azimuth=Compass Reading 162.o

Echo 8/10 @ 110.oW Dish Elevation 44.o
Azimuth= Compass Reading 147.o

The compass readings are the TRUE Magnetic Deviation.

You Dish Elevations about the same.
I would try to hit 110 first since is 11.o East
from your location.
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 2820
Registered: Sep-06
www.dishpointer.com is great for dish pointing help

went to the doc today now I am in a cast on one arm-hand locked at a 90 and got some new pain pills that will prob knock me out LoL
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us