Just got nfusion and trying to set 110, 119 and 61.5. I have one quad Dish Pro lnb dish 500 which is pointing to 110 and 119. I also have another dual Dish Pro lnb dish 500 pointing to 61.5.
All this are connected to disque switch as follows.
Sat 1 -> 61.5
Sat 2 -> 110
Sat 3 -> 119.
I can not lock any of this birds. All this works fine with my cs400 though.
Please help me and tell me what should I put in the settings. Like, LNB Type, Diseqc Mode and Multi-Dish switch. Please help.
ok p 40.. first of all ... before setting up any thing.. u need to download a bin mannually.. (means loader etc and using cables )... then u will get an option for sat ,setting etc.. i had same problem.. first download new bin mannually.. then after that u can use ur remote...
if its a dishpro lnb for 110-119 you can not use the disqc switch with it. you have to use the dp34 switch its made to add anther lnb to the dishpro lnb drawing is how to set it up with just one receiver in your case
here is what I found its more complex and will require a powered switch to be able to control the 2 dishpro lnb's....i woul go find a single lnb instead
if you have the dishpro lnb's you were getting lucky getting them to work with a disqc switch. That lnb dishpro has a disqc switch built in and your receiver can only control one switch. you need to identify the lnd's better i guess. This dishpro lnb is a confusing lnb .
go look at the lnb's please do they look like the ones in the pic?
it would be better to get 3 singles or BEST to get a 31"dish and the QPH-031 lnb and a motor. Then you could get all the sat's I get 2400 channels with mine
