I have VS9000HD, with 8psk module installed. I have a dish 1000 antenna up with 3 single dishpro lnbs and a dp34 switch. I have a signal strength of 68 and quality %69 for 110 and 119. Both sats are recognized by my stb. However 129 only has a signal strength of 56 and quality is 0 zero, the stb does not recognize that signal is sat 129. I am getting the few HD channels from 110/119 just fine. Will the 1000 not work with 3 single dishpro lnbs? Or better yet, can anyone tell me the best set up to get all HD channels from 110,119, and 129. Thanks.
Here is a list of satellites and the correct lnb's to use with them:
61.5W Echo 3 - use standard circular lnb - 11250 MHz 63W Estrela - use linear lnb, either universal or standard linear- 10750 MHz 71.8W Nahuel 1- linear lnb, either universal or standard linear- 10750 MHz 77W Echo 4 - circular standard lnb - 11250 MHz 79W Amc 5 - linear lnb, either universal or standard - 10750 MHz 82W Nimiq 2 - circular standard lnb= 11250 MHz 87W Amc 3 - --- linear lnb, either universal or standard - 10750 MHz 91W Galaxy 11- linear lnb, either universal or standard- 10750 MHz 91W Nimiq1&3- circular lnb standard= 11250 MHz 93W Intelsat 6- linear lnb, either universal or standard-10750 MHz 95W Galaxy 3c- linear lnb, either universal or standard - 10750 MHz 97W Intelsat5- linear lnb, either universal or standard - 10750 MHz 101W Amc 4 - linear lnb, either universal or standard- 10750 MHz 103W Amc 1- linear lnb, either universal or standard- 10750 MHz 105W Amc 15- linear lnb, either universal or standard- 10750 MHz 107.3W Anik - linear lnb, either universal or standard- 10750 MHz 110W Echo 8 & 10,X - circular lnb standard - 11250 MHz 111W Anik f2 - linear lnb, either universal or standard - 10750 MHz 116.8W Satmex5 - linear lnb, either universal or standard - 10750 MHz 119W Echo 7 - circular lnb standard - 11250 MHz 121W Echo 9 - linear lnb, either universal or standard - 10750 MHz 123W Galaxy 10r - linear lnb, either universal or standard - 10750 MHz 127W Galaxy 13 - linear lnb, either universal or standard - 10750 MHz 129W Echo 5 - circular lnb standard - 11250 MHz 148W Echo1 & 2 - circular lnb standard - 11250 MHz
Does anyone know if my setup should work? I am trying to narrow my problem down. If I know that this setup is working for someone else, then maybe it could be an aiming problem, or something like a tree branch in the way....
