Yes that is what i do but you have to go into device manager and see where the adapter went meaning what comport then you have to set your loader to that comport
NEW USB 2.0 to 9 pin RS232 COM Port Serial Adapter
This USB to Serial adaptor allow your USB port devices, such as PDAs and notebooks, to connect to modem, ISDN terminal adapter, PDA, bar code scanner, label printer, and devices with DB9 SERIAL ports.
Features:
* Conforms to USB 1.1 standard * Supports RS 232 serial interface * Maximum data transfer rate of over 1Mbps * Can be used for PDA and modems * USB extension cable also supplied / approx. 80cm long * Support for following operating systems: Windows 98/2000/XP Mac OS V8.
lucky: A USB to serial port will give you a straight serial out. If your receiver requires a null cable and you have one, you should use that in series. If your USB/Serial came with its own installation CD, USE THAT in preference to Microsoft's automatic installation. You may have to de-install it and then reinstall saying you have your own CD. USB to Serial convertors cause problems often because of incorrect installation. Go into Device Manager of your computer, find the adaptor and make sure the Com-port is properly selected and there are no conflicts.
I got Panset 2700A and tried to load the latest bin X-87BL_071122_B75_224_api, using 27.02 loader for the first time but no luck with it. The download process never progressed from 0%. The only other thing I did before it was scanning channels from one satellite. Please help me with any suggestions.
