I am wondering how can I get Bell Exp. Vu channels on my current FTA. I scanned the Nimiq 1.2 and get the channels name but cannot view anything in the channel. Is there something else I need to do. By the way I have 2 dishes one for the USA channels and other for the Indian channels. And get them both.
no i have Viewsat Ultra. I can scan the Nimiq even get all the Canadian Channels but dont see anything there. Basically its just displaying the message "Autoroll processing.....". I waited for this message to go the whole night and still there.
Cool: You said: "I have 2 dishes one for the USA channels and other for the Indian channels. " Unless you have the latest model integrated 4 lnb dish or a large 33" dish with 4 lnbs, you can't get Bell (91W and 82W) and USA channels (119w and 110W) on the same dish. The Indian dish is a separate issue, and can only scan 61.5w or 148w as the case may be for the India Channels.
Well what I meant was that I have a seperate dish for Bell. Actually, I had this dish from Bell last year when i was a Bell subscriber. But now I am not and so the dish is there with the original LNB that came when I subscribed to Bell.
allow me to jumb in.. are u using a diseq switch for all these channels and does the data input represent each satellite with its intended port.... check that
As I read the first post here he stated he get channels but it is trying to auto roll.
Make sure you have the LATEST bin from Total HERE , your antenna is pointed to the correct sat, and allow time for the receiver to autoroll. I am having no problems here with BEV or dish....both sytstems do have to autoroll every once in a while but in a few moments all channels are back.....let us know
I treid to leave the autoroll processing the entire night but still didn't get the channels. I think I need to look into the disequ switches. I am not sure if that could be the problem. I will keep posting after some tests. Thanx all for your replies here,
