I start using my Pansat 2500A. I didn't use it for about an year. Looks like things have changed a lot. I used 293T package and downloaded the 293T BIN to my PANSAT. There also another file which is called 293T_JTAG but I used the file with just the 293T. My problem is when I try to input Niargavision and Niagravision2 keys there is no enough space for all the keys. There is only space for 8 keys. Also, I don't know what is the provider ID and the key.
What am I doing wrong here?
Am I using the wrong BIN?
Is there a different BIN?
Whats the different between 293T.BIN and the 293_JTAG.BIN ?
nyc you need to make sure that your pansat is not a clone. the bin that your trying to use is for a clone box.many people have had trouble with that bin. try using an older bin to see if this helps.293 jtag bin includes info on how to jtag(bring a box back to life)when a wrong bin has been uploaded to box.as for the keys you will see key86 and key 96 which are the same as 00 and 01 on niagravision you should have a total of sixteen pairs in 00 and 16 pairs on 01.
nyc alien: There is nothing wrong in using 293T on a genuine Pansat 2500. You have to do factory reset and then upload the 293T. In your particular, case: 1. do factory reset. 2. Install 288T or 289T BIN. 3. Set correct date, time, time zone. 4. Install 293T. 5. Check item 4 6. Turn off receiver at back and turn on after 30 secods. 7. Scan at least one sat. 8. Repeat item 6 9. Set autoroll on. Let the keys come in automatically.
Menu/Parental control/second Pin/0000/autoroll You will see 4 items to turn ON. key code ON DN ON BEV ON Globecast ON
There are still bugs in the software, so many people have to turn autoroll off after the keys have rolled in, to prevent sporadic resets. You can also keep autoroll off and enter keys manually.
I'm up and running. Thank you very much for all your help. However. I use 293T in but there is no Autoroll option. Its on automatically. I don't know how to turn it off. Also I would rather turn off the Autoroll. Thank you again and everyone who helped me.
I'm up and running. Thank you very much for all your help. However. I use 293T in but there is no Autoroll option. Its on automatically. I don't know how to turn it off. Also I would rather turn off the Autoroll. Thank you again and everyone who helped me.
I'm up and running. Thank you very much for all your help. However. I use 293T in but there is no Autoroll option. Its on automatically. I don't know how to turn it off. Also I would rather turn off the Autoroll. Thank you again and everyone who helped me.
you need the 293T bin file what loader did you use. did you do your instalation again scan your sats. for answers plus keys and files go to www.ftamorvex.com
Turning autoroll off on Pansat 2500 and clones. Menu/parental control/second pin/0000 autoroll options is at the bottome. Keep keycode on and turn autoroll off on DN,BEV and Globecast. If you have not scanned anysatellite, you will have to scan at least one satellite before you can go into parental control.
i use bi 293t in pansat 2500a clone in parental control keycode turn off dn,bev and gc and nothing i cant see any channel. the sat is echo 3 dich net in nagra and i dont know what happen somebody help me to understand
Irvin Lopez: I am presuming you have rescanned Echo 3 using Blind Scan option, your connections were OK and have not changed, and you still have no TV.
You have two options. Keycode should be on. Turn autoroll on, then switch off at back and switch on after 30 seconds. The keys should roll in the next 2-20 minutes. Now turn autoroll off and check the keys in Nagravision 2. They must match the current keys below. If they do not, press exit once, do "Set Default keys" then go back into Nagravision 2 and install both key 00 and key 01 for Provider ID 0101 and/or 0901 if you also have BEV. Exit out completely, switch off at back and on after 30 seconds.
Nalin: thank you by your help, i do all that you told me but dont happen nothig is the same i saw scrambled or bad channel. i dont know wath happen, i use bin 293t and follow all your instruction i think that i dont understand or do it all bad
The only thing I forgot in my instructions is to ask you to do user setup and correct date, time and time zone. You should now do: 1. set factory defaults. 2. install 280T or 281T BIN using BL updater 1.4 3. Install 293T BIN using BL updater 1.4 4. do user setup with date, time and time zone. 5. Switch off and on. 6. Try autoroll on and wait for keys, otherwise set autoroll off and enter keys manually.