|
Silver Member Username: 2pacalypse1971Sandusky, Oh Post Number: 301 Registered: Jul-05 | ok i'm thinking about gettin 2 kicker cvr 15's (dual 4 ohm) and i'm really interested in the rockford p10002 amplifier with specs of 250x2 at 4 ohms, and 500x2 at 2 ohms, and 1000x1 watts at 4 ohms bridge, if i get the dual 4 ohm kickers, how do i wire it to get 4 ohms bridged, or can i not do that??? |
|
Silver Member Username: KaerfplSpencerport, NY USA Post Number: 495 Registered: Jun-06 | check it out: http://www.the12volt.com/caraudio/woofer_configurations.asp |
|
Silver Member Username: 2pacalypse1971Sandusky, Oh Post Number: 304 Registered: Jul-05 | that really didnt' help me out i knwo hwo to wire everything for like a 1 ohm load and a 4 ohm load, it is just the ''bridge'' part that confuses the hell outta me |
|
Silver Member Username: Waterboy2289Martinez, Georgia 2 18 SX w/ ... Post Number: 196 Registered: Jan-06 | the bridged part just has to do with what channels you connect the subs to on the amp......they will be marked on the amp and in the amps manual.....it is very simple....trust me |
|
Silver Member Username: 2pacalypse1971Sandusky, Oh Post Number: 305 Registered: Jul-05 | so on the dual 4 ohm sub, would i connect both positives and both negatives, or would i connect a + to a - and then run the other 2 +'s and -'s out, i'm stil a little lost |
|
Silver Member Username: Waterboy2289Georgia, DiRtY SoUtH ... 2 18 SX w/ ... Post Number: 200 Registered: Jan-06 | this should explain it: http://www.imagehosting.com/show.php/454405_twodvc4subswiredto4.JPG.html |
|
Silver Member Username: Waterboy2289Georgia, DiRtY SoUtH ... 2 18 SX w/ ... Post Number: 201 Registered: Jan-06 | just connect the (+) from both subs and the (-) from both subs to the same terminals on the amp (obviously the designated bridged terminals) |
