Bronze Member Username: VbalashoOregon Washington Post Number: 74 Registered: Jun-06 | Flashed my 3500sd with new 316 bin, worked 3 days fine but now no volume. Did everything but still I have picture but no volume. Please help |
Bronze Member Username: Da_onePost Number: 33 Registered: Nov-06 | as LK told me: i see that you have been registered since jun-06 and you have 74 posts. you must have some practice already. go through the elimination process and give more details. if you want to see how i was helped by LK check this out: https://www.ecoustics.com/electronics/forum/home-video/338019.html |
Bronze Member Username: VbalashoOregon Washington Post Number: 75 Registered: Jun-06 | The reciever worked for 3 - 4 days with new bin 316. next thing I have everything besides volume. When I turn the volume on 3500 and the TV all the way up, I could hear a little bit, but mostly some electrical humming. The whole thing sound like I need to do something with the TV. I hooked different reciever to the same TV and volume was up working. I hooked 3500 back and the same i have TV without volume. I rset 3500 several times, did factory reset, download bin again using the SD card, scanned and again the same problem. I understand that if the reciever is dead, you need to jtag it, but my only no volume. I pl;ayed with the remote but the same thing. Thank's |
Silver Member Username: TapemanPost Number: 762 Registered: Oct-06 | Simple things you can consider: - There is a volume just for receiver make sure it is on Hi - Cables going to TV maybe bad try different set of cables. Challenging issues; - Audio pre-amp may be shot (white and red) {What I will try coax output to TV) - Or vise versa if it is shot from coax try the white and red audio out (RCA) to TV Pre-amp won't be easy to repair it can be from a simple broken ground on PCB board to a shot transistor/OPAmp all I can tell you preamp on coax port is different from RCA cables (White &Red) YOU MAY WANT TO GIVE THAT A TRY FIRST. feel free to ask more questions and tell me which wiring you got. |
Bronze Member Username: VbalashoOregon Washington Post Number: 76 Registered: Jun-06 | thank's, but the other reciver was woekoing fine |
Bronze Member Username: VbalashoOregon Washington Post Number: 77 Registered: Jun-06 | is that true |
Gold Member Username: NydasPost Number: 2168 Registered: Jun-06 | vad: You can reinstal the previous BIN and if the problem persists, install the factory BIN and send it to Pansatusa for warranty repair. |