IGNORE all these troublemakers!

 

Gold Member
Username: Lklives

Post Number: 7699
Registered: Jan-06
U know we all feed these azzholes, when we reply to their posts..thats exactly what they want...ATTENTION!...they don't get it at home,school, daily lives, or in their environments...so they come here starving for attention, so they totally disrupt these forums..we reply back in anger or defensively or in humor, and they what they desire and get their attention fix..this cycle will never be broken , unless U stop replying and feeding them!

IGNORE them!...Hopefully they will starve and go elsewhere for their attention fix!

dsscommunity
Lk suxit
psycho mofo
RGA aka RyersonsGreyArmy
Herb

Do NOT respond to them in this or any threads...let them talk sh*it all they want...after awhile they will take their marbles and go play somewhere else..exchanging words with them is useless, since they are IGNORANT and childish and immature..it just gives them the ATTENTION they seek here!...and takes the focus here away from FTA, which is what many are really here for, to learn and get their FTA problems resolved..
 

Gold Member
Username: Satscanner

Beaversbush, Sportsmans P... Great White ...

Post Number: 1113
Registered: Nov-06
I'll give it a try,nothing else seems to make them go away,they put us on the read only list,and now we put them on the ignore list.Let the truce begin and back to fta.
 

Silver Member
Username: Psychomofo

Post Number: 234
Registered: Nov-06
Great idea, I would like to encourage all my fellow LK haters to double up on posting in threads where LK, Scat Scanner, Ryerson, RyersonArmy1, and the rest of the douche bags insult, threaten or generally bash members of this site. We will never starve for posts wherever you are LK, you have a horrible habit of bad mouthing immigrants, women and newbies, so we will be busy standing up for them and telling them exactly where to find good, friendly, honest an free help for their fta needs. Thanks for starting this post.
 

Silver Member
Username: Ryersongheyarmy

Higher Level, Village People

Post Number: 137
Registered: Jan-07
U know we all feed these azzholes, when we reply to their posts..thats exactly what they want...ATTENTION!...they don't get it at home,school, daily lives, or in their environments...so they come here starving for attention, so they totally disrupt these forums..we reply back in anger or defensively or in humor, and they what they desire and get their attention fix..this cycle will never be broken , unless U stop replying and feeding them!

IGNORE them!...Hopefully they will starve and go elsewhere for their attention fix!

LK
Ryerson
SatScanner




Do NOT respond to them in this or any threads...let them talk sh*it all they want...after awhile they will take their marbles and go play somewhere else..exchanging words with them is useless, since they are IGNORANT and childish and immature..it just gives them the ATTENTION they seek here!...and takes the focus here away from FTA, which is what many are really here for, to learn and get their FTA problems resolved..
 

Gold Member
Username: Lklives

Post Number: 7705
Registered: Jan-06
All these sites ALWAYS have the latest files, bins, how to's, manuals, guides, dish pointing calulators and tips, hardware info, jtag info, newbie and getting started sections, actively moderated with a no troublemakers and no bashing allowed policy.. and are free, and only require a simple free registration...Your email info is kept private, unless U specify differently..and U will be notified via email of any replies to any questions U may ask (or U can shut that feature off, if U like)..and your IP is sacred and never released..

Many of these specialize in particular FTA receivers as noted next to their links..USE those for your particular receiver manufacturer..

If U want real info, trouble free, no costs, friendly help, no hassles, latest files and manuals, then use these...these are well established, and have a long history, and are the best known sites throughout the entire DSS community for many years now...

Ecoustics is NOT a Dss site, since is has NO files, no manuals, no guides, little info, no specific categories, and is almost impossible to find anything because every thread here has been allowed to be hijacked (because no mods are active) and the Subject does not relate to the posts within it....also Ecoustics is basically an Electronics site for home audio, television, DVDs, stereo's, and things of that nature, NOT FTA satellite information

So again I highly recommend using ANY of these sites in this first post!....U pick one and use it for fast , friendly info and files, and many of these also have a LIVE chat area what U can get an IMMEDIATE response from a reliable knowlegeable sources!...U will save yourself much time, especially if you are a newbie to this hobby!...and most all also will have the latest keys posted as well, and the keymaster, keyripper, key grabber utility files to download as well....and if plastic is your thing , some also have an area for that as well as FTA..Good Luck and enjoy this hobby!



Final Solution Free To Air:
[link removed] (C00LSAT and All receivers)
DSS Newbies:
[link removed] (Pantecs,all clones and all receivers)

File Share Site - No Registration Required:
--------------------------------------------------
Good for gettting Original factory firmware:
[link removed]

Best site for DISHNET info, channels, transponders and changes etc..
[link removed]
[link removed]
[link removed]
[link removed]
www.filez.us/km3/keys.shtml

I would stay away from most other sites, especially the ones being spammed in every thread here by these people..these people are here to destroy FTA and use new unestablished no name sites to gather your personal info for malicious purposes..be careful of these people and all their site recommndations..

dsscommunity
RyersonsGheyArmy
psycho mofo
Lk suxit
 

Silver Member
Username: Ryersongheyarmy

Higher Level, Village People

Post Number: 147
Registered: Jan-07
U know we all feed these azzholes, when we reply to their posts..thats exactly what they want...ATTENTION!...they don't get it at home,school, daily lives, or in their environments...so they come here starving for attention, so they totally disrupt these forums..we reply back in anger or defensively or in humor, and they what they desire and get their attention fix..this cycle will never be broken , unless U stop replying and feeding them!

IGNORE them!...Hopefully they will starve and go elsewhere for their attention fix!

LK
Ryerson
SatScanner




Do NOT respond to them in this or any threads...let them talk sh*it all they want...after awhile they will take their marbles and go play somewhere else..exchanging words with them is useless, since they are IGNORANT and childish and immature..it just gives them the ATTENTION they seek here!...and takes the focus here away from FTA, which is what many are really here for, to learn and get their FTA problems resolved..


Think twice.. STAY AWAY of any sites Posted By LK

He has reported on this forum of Virus and Spyware links associated to sites he visits. Don't sound like a list of Reputable sites to me. If members need to fear being infested with spyware
 

Bronze Member
Username: Natally

LondonGB

Post Number: 40
Registered: Nov-06
Free To Air Installation Guide !

--------------------------------------------------------------------------------

A. Pre-Installation Homework

* Verify if the dish size is indeed
* adequate for your area and targeted satellite.
* Obtain Look Angles readings for
* your city and targeted satellite. This includes: - the Azimuth reading which
* the number of degree is clockwise away from the north. (Use of compass) the
* Elevation reading which is the vertical angle up from the horizon.


B. List of Equipment and Accessories required

* FTA Receiver Satellite Dish (30 " or 36 ")
* LNBF
* RG-6 coaxial cable (F56-G indoor connector, F56-SG outdoor connector if you make your own cable)
* TV set
* Map Compass for Azimuth reading
* Satellite Finder (optional)
* Drill
* Phillips screw driver
* Socket set/wrenches


C. Installation Steps

* Assemble dish with instruction
* supplied during time of purchase.
* With the aid of a compass, orient
* toward the general azimuth direction and the elevation of the satellite and
* locate an ideal area to position the dish. Here, there must be no
* obstructions between the satellite and the dish from trees and buildings.
* Avoid installation on the roof if at all possible to prevent high wind
* damage or for ease of access if required. (e.g. side of the house, 4X4 post)
* Put in place the dish pole on
* firm support and keep it vertically plumb to enable accurate azimuth and
* elevation settings.( use 2 of the 4 or 6 lag screws for now )
* Feed the RG6 cable through the
* pole, then mount the dish onto the pole but do not tighten the screws too
* much for now. Connect the LNB head to the wire that was fed through the
* support pole and secure the LNB head with the provided screw onto to the
* support pole.
* Complete connections of wiring to the receiver and TV.
* As an option you can use a satellite finder by attaching it between the dish and the receiver (highly recommended e.g. SF-95.)
* Adjust the elevation to the desired vertical angle; do not tighten the screws too tight to allow for some adjustment...
* Now rotate the dish to point more
* closely to the targeted azimuth position in very small incremental angle,
* allows 5-10 seconds between any movements of the dish. This allows the
* receiver to complete a signal scan. A lock response on the receiver would
* indicate that you have located the signal.
* You are targeting signal strength
* of between 50 to 80. If you have strong signal strength but no signal
* quality or lock. Try adjusting the dish a bit to the right or left. Optimum
* signal quality is between 70 and 100.
* Set the LNBF polarization tilt by
* rotating clockwise for western region (negative LNB polarization) to improve signal quality reading. Rotate counter-clockwise if you are from the eastern
* region (positive LNB polarization).
* Secure the dish pole with the
* rest of the lag screws.
Upload
 

Gold Member
Username: Lklives

Post Number: 7721
Registered: Jan-06
U know we all feed these azzholes, when we reply to their posts..thats exactly what they want...ATTENTION!...they don't get it at home,school, daily lives, or in their environments...so they come here starving for attention, so they totally disrupt these forums..we reply back in anger or defensively or in humor, and they what they desire and get their attention fix..this cycle will never be broken , unless U stop replying and feeding them!

IGNORE them!...Hopefully they will starve and go elsewhere for their attention fix!

dsscommunity
Lk suxit
psycho mofo
RGA aka RyersonsGreyArmy
Herb

Do NOT respond to them in this or any threads...let them talk sh*it all they want...after awhile they will take their marbles and go play somewhere else..exchanging words with them is useless, since they are IGNORANT and childish and immature..it just gives them the ATTENTION they seek here!...and takes the focus here away from FTA, which is what many are really here for, to learn and get their FTA problems resolved..
 

Silver Member
Username: Lksuxit

Post Number: 144
Registered: Dec-06
Exchanging words with any of those on your list is just impossible for you and your b*tches. You don't have anywhere near the skills to do it correctly, so good idea not to try. Fact of the matter is you are the problem. Once you quit talking sh*t to the members here, most of us will dissapear.
 

Silver Member
Username: Ryersongheyarmy

Higher Level, Village People

Post Number: 152
Registered: Jan-07
U know we all feed these azzholes, when we reply to their posts..thats exactly what they want...ATTENTION!...they don't get it at home,school, daily lives, or in their environments...so they come here starving for attention, so they totally disrupt these forums..we reply back in anger or defensively or in humor, and they what they desire and get their attention fix..this cycle will never be broken , unless U stop replying and feeding them!

IGNORE them!...Hopefully they will starve and go elsewhere for their attention fix!

LK
Ryerson
SatScanner




Do NOT respond to them in this or any threads...let them talk sh*it all they want...after awhile they will take their marbles and go play somewhere else..exchanging words with them is useless, since they are IGNORANT and childish and immature..it just gives them the ATTENTION they seek here!...and takes the focus here away from FTA, which is what many are really here for, to learn and get their FTA problems resolved..


Think twice.. STAY AWAY of any sites Posted By LK

He has reported on this forum of Virus and Spyware links associated to sites he visits. Don't sound like a list of Reputable sites to me. If members need to fear being infested with spyware
 

Bronze Member
Username: Pffft

Ya Right

Post Number: 75
Registered: Jan-07
LK, thanks for post 7705
 

Silver Member
Username: Ryersonresurrected

CANADA Charlatan...

Post Number: 834
Registered: Sep-06
Suxit, idiots will not disappear, simply because they are idiots, and this is what idiots do.

Your gripe with LK is noted. But once again, these idiots are using the latest occurrences 2 paint LK in an unfavourable light. But they forget that we can see/think for ourselves.

No one but LK questions the obvious.

Someone by the username of Roxanne posts (paraphrase): "I am a female....come to this site", and no one budges, given how quick everybody usually is 2 step in and bash, no one calls this person on it except LK. Give me a break man, now LK is sexist along with racist. It's nonsense.

Ecoustics is about the exchange of information/ideas, not a lot more to this site..... and we can't even get this right. We crap all over LK for pointing out what should be obvious 2 even newbies.

I'd have more respect for those who chose not 2 make any comments at all, so not appear being agreeable with LK, than for those who immediately used that excuse 2 gang up on him again.

Was he rude to "Roxanne"?

YOU BET he was - and good that he was, in this case.

Let "Roxanne" earn credibility - or at least have some consistencies in the messages before expecting anybody 2 take their posts seriously. Spamming on the first post/thread, and claiming ur doing it for "females" is nothing short of ridiculousness.

Agree/disagree with LK - but i, for one, thank LK for speaking up, YES, again!}
 

Bronze Member
Username: Pffft

Ya Right

Post Number: 76
Registered: Jan-07
Good Post Ryerson, i fully agree
 

Silver Member
Username: Psychomofo

Post Number: 256
Registered: Nov-06
Ryerson, I hear what you are saying, but I am not sure if I agree with you on this Roxanne. LK suxit may have a different opinion, but it seemed to me that she was just trying to help, maybe she didn't know the ins and outs of Ecoustics like you would. After that first post LK just lamb-basted her. I don't think that was right and just atypical of LK's behavior. I went back and read all of her posts and even through all LK and his stuper group's bashings she never lashed out at them. Pretty stand up in my book and I think it shows her character. I agree to disagree with you on your opinion of Roxanne, but respect your opinion and how you put it forward.
 

Silver Member
Username: Ryersonresurrected

CANADA Charlatan...

Post Number: 838
Registered: Sep-06
Well that's a first mofo. But, in reference 2 Roxanne's first post/thread, LK simply pointed out what I'll bet most of us were thinking, but didn't bother posting. I won't fault him for that.

I respect anybody who disagrees with what i said, and i appreciate that u chose 2 be respectable about ur disagreement.

If that was a norm around here, we might be discussing/reading more important things (FTA related) around here, and i could get back 2 posting my neutral pics.
 

Gold Member
Username: Satscanner

Beaversbush, Sportsmans P... Great White ...

Post Number: 1126
Registered: Nov-06
I missed that too ,but am glad lk pointed it out us,I thought "IT" was reffering to ecoustics as "a nice place."When it was spamming another site.
 

Gold Member
Username: Lklives

Post Number: 7737
Registered: Jan-06
U know we all feed these azzholes, when we reply to their posts..thats exactly what they want...ATTENTION!...they don't get it at home,school, daily lives, or in their environments...so they come here starving for attention, so they totally disrupt these forums..we reply back in anger or defensively or in humor, and they what they desire and get their attention fix..this cycle will never be broken , unless U stop replying and feeding them!

IGNORE them!...Hopefully they will starve and go elsewhere for their attention fix!

dsscommunity
Lk suxit
psycho mofo
RGA aka RyersonsGreyArmy
Herb
eatfish

Do NOT respond to them in this or any threads...let them talk sh*it all they want...after awhile they will take their marbles and go play somewhere else..exchanging words with them is useless, since they are IGNORANT and childish and immature..it just gives them the ATTENTION they seek here!...and takes the focus here away from FTA, which is what many are really here for, to learn and get their FTA problems resolved..
 

Silver Member
Username: Eatfish111

Post Number: 119
Registered: Dec-06
wooohooooo I made the list hehehehehehehe
I would like to thank all the little people who have helped make this dream finally become a reality.
LK grow up man just post your answers to peoples questions and stop filling this site with useless info like this thread.
I think LK is admin here it seems like he feeds the machine here with threads and posts like the previous one.
 

Silver Member
Username: Eatfish111

Post Number: 120
Registered: Dec-06
Cmon follow your own advice and prove to us that you dont add to the fire ignore all the posts put up by people on your list do not respond just answer the questions and provide the help that you wish too.
I know this wont happen but practice what you preach bud DO NOT RESPOND JUST IGNORE IT.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us