|
Silver Member Username: Bump05We Stay Fly, 18 SX USA Post Number: 713 Registered: Aug-06 | which setting do I use to check the voltage on my amp its got like 7 settings and where do I touch the points at on the rca outputs? which rcas still in or no thanks |
|
Gold Member Username: BestmankindFi Audio BTL Post Number: 9066 Registered: Oct-05 | you connec the dmm ot the subwoofer output. disconnect the sub and put the dmm in there instead. |
|
Silver Member Username: Bump05We Stay Fly, 18 SX USA Post Number: 714 Registered: Aug-06 | on the rca right? take rcas off the amp and stick the dmm things in? |
|
Gold Member Username: BestmankindFi Audio BTL Post Number: 9069 Registered: Oct-05 | no. leave the rca's in the way they are suppose to be. connect the dmm to amp like you are connecting the subwoofer. on the + and -. |
|
Gold Member Username: BestmankindFi Audio BTL Post Number: 9071 Registered: Oct-05 | oh wait you are trying to see how many volts your amp is seing? i thought you were trying to set the gain. if that is the case, just put it on the power and ground. |
|
Silver Member Username: Bump05We Stay Fly, 18 SX USA Post Number: 715 Registered: Aug-06 | ok on the speakers terminals..the cords for my dmm are like needles so just touch red on pos and black on neg?? and put dmm on dcv 200 since my amp is 56.4v and its a 2 channel so theres left and right gain just play with both till it hits my number?? |
|
Gold Member Username: BestmankindFi Audio BTL Post Number: 9073 Registered: Oct-05 | yeah. its ac volts. |
|
Silver Member Username: Bump05We Stay Fly, 18 SX USA Post Number: 716 Registered: Aug-06 | im trying to set the gain...i was following the directions on the subwoofertools things and it said figure out how many volts ur amp does or whatever and i put 800rms @ 4ohms and it said 54.6v or whatever so what do i do just hook up the things to + - on amp and turn the gain till it says 54.6 or what i dont get it.... |
|
Gold Member Username: BestmankindFi Audio BTL Post Number: 9075 Registered: Oct-05 | yes. lol. sorry for the runaround. |
|
Silver Member Username: Bump05We Stay Fly, 18 SX USA Post Number: 717 Registered: Aug-06 | haha no prob... ;) so just clarifying to make sure.. put dmm on dvc on the 200 setting since next lowest is 20 (which i need 50 cause thats what my amp does) stick red needle in + speaker terminal stick black needle in - Speaker terminal *play with left/right gains till digital meter reads what my Voltage should be at? |
|
Silver Member Username: Bump05We Stay Fly, 18 SX USA Post Number: 718 Registered: Aug-06 | oh and whats the eqaution for port area i wanna make like 20sqin per port cubes |
|
Gold Member Username: BestmankindFi Audio BTL Post Number: 9076 Registered: Oct-05 | how many ports? also you want to set your dmm to ac not dvc. check your pm man. |
|
Silver Member Username: Bump05We Stay Fly, 18 SX USA Post Number: 719 Registered: Aug-06 | just one slot port I wanna go bigger and ac it is thanks... I don't get pms for some reason email me eastbayafi05@msn.com |