Alt help!!!

 

Gold Member
Username: Adddisorder

West palm, Florida

Post Number: 1861
Registered: Jan-06
ok guys you know iv been having alt trouble so heres the deal.

when i first installed it i got 14.6v then after a minute or two the highest i ever saw was 14.1 and at idle with only my a/c on it goes down to 12.5v and doesnt come back up.

today i unplugged the plug that goes in the alt. and i got 15v with and without the a/c on.

do you think its bad to run it without the plug in?

and do you guys know what that plug does?
 

Silver Member
Username: Leew

stealth fighter aka j..., Yokosuka, ... SPESNAZ. ...

Post Number: 830
Registered: Jan-06
1994 mazda 626 Charging Circuit!
Upload
 

Silver Member
Username: Leew

stealth fighter aka j..., Yokosuka, ... SPESNAZ. ...

Post Number: 831
Registered: Jan-06
where exactly located that plug? what motor is it(2L,or 2.5L)?
 

Gold Member
Username: Adddisorder

West palm, Florida

Post Number: 1870
Registered: Jan-06
its the 2.0 and the plug is just two little wires going into the alt. its like on top if your looking down at it close to the positive post.
 

Gold Member
Username: Drivingreckless

TREO, USA

Post Number: 2349
Registered: Apr-06
Big three upgraded???
better battery bro
wut good is a HO alt with a shitty bat
i reccomend kinetik, stinger, northstar, oddessey

u wouldnt put a 4cylinder engine in a ferreri would u
 

Silver Member
Username: Leew

jennifer contreras , Yokosuka, ... SPESNAZ. I...

Post Number: 833
Registered: Jan-06
----------------------

soon you have to upgrade alt! UploadUpload
 

Gold Member
Username: Drivingreckless

TREO, USA

Post Number: 2351
Registered: Apr-06
IDK wut ur tryin to say
picutes???
 

Gold Member
Username: Adddisorder

West palm, Florida

Post Number: 1872
Registered: Jan-06
i have stock batt. but had it tested and its fine. big 3 is done only in 4g right now. its a 150A ho alt.

the plug goes into terminals L and S ^^^
 

Gold Member
Username: Drivingreckless

TREO, USA

Post Number: 2355
Registered: Apr-06
if u get a better bat trust me ull see an improve ment u should have an extra battery for every 1k u run so dont expect to get 14.4 wen u dont have the power to back it up
every one sees voltage drops its normal but get a better battery man and 0 guage BIG three
 

Silver Member
Username: Leew

jennifer contreras , Yokosuka, ... SPESNAZ. I...

Post Number: 834
Registered: Jan-06
I tried to say it's a "Voltage Regulator" fu.k up!
 

Gold Member
Username: Drivingreckless

TREO, USA

Post Number: 2358
Registered: Apr-06
could be
take it off
then take it to advanced autoparts they have a alternator testor
ive taken mine thier it works fine
it seems like ur best option at this point
 

Gold Member
Username: Adddisorder

West palm, Florida

Post Number: 1875
Registered: Jan-06
im going to take it to these guys im cool with at the autopart store and tell bench test it for me.

just pisses me off at idle only running a/c i get bad voltage drop and it doesnt come back up.

i hooked my dmm up so i can read the bat. voltage while i drive and i get 14.1 above idle to 13.5 so thats good.

i know i need damn 1/0 im getting it pretty soon. as for a battery i know a new one would definatly help but it doesnt change that my alt. puts out sh)t when i run my a/c or anything at idle.
 

Gold Member
Username: Adddisorder

West palm, Florida

Post Number: 1884
Registered: Jan-06
sonofaBITCH i took it off and the damn bearing is bad its hard to turn and gets stuck so im screwed.

i can take it to this shop and they fix the bearings but i dont know for how much yet becuase they are closed.

or i can buy a new alt. for 140 and send my HO in and then just keep the stock one for a back up because with the luck im having i could run into a problem with my HO again and i dont want this sh)t to happen. plus if i dont send it back and have it repaired locally it voids the two year warrentee.

so basically im out 140$ and i need money for the mag GB
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 3406
Registered: Dec-05
 

Gold Member
Username: Adddisorder

West palm, Florida

Post Number: 1892
Registered: Jan-06
yeah dude im really pissed. and im buying a mag to so this is like not so good on the wallet.
 

Silver Member
Username: Andrew571

Stillwater/Edmond, Oklahoma USA

Post Number: 228
Registered: Oct-05
did u break it, or just not notice it when u were putting it on??????
 

Gold Member
Username: Adddisorder

West palm, Florida

Post Number: 1897
Registered: Jan-06
just noticed when i pulled it off. it was fine when i put it on my belt tension was fine and it never squeeled but when i took it off it was hard to turn and stuff
 

Silver Member
Username: Leew

jennifer contreras , Yokosuka, ... SPESNAZ. I...

Post Number: 846
Registered: Jan-06
bearing fu..ked coze the belt was overtightened!
now watch out for water pump !!!
 

Gold Member
Username: Adddisorder

West palm, Florida

Post Number: 1898
Registered: Jan-06
hmm i dont know i really dont think the belt was over tightend but none the less its f uc ked up and im screwed
 

Silver Member
Username: Leew

jennifer contreras , Yokosuka, ... SPESNAZ. I...

Post Number: 847
Registered: Jan-06
Upload
 

Silver Member
Username: Leew

jennifer contreras , Yokosuka, ... SPESNAZ. I...

Post Number: 848
Registered: Jan-06
it's very easy to over tight!
 

Silver Member
Username: Leew

jennifer contreras , Yokosuka, ... SPESNAZ. I...

Post Number: 849
Registered: Jan-06
measured with tension gauge (used on for less than 5 min.),new belt have to be: Alternator 170-180 Lb, used belt 110-150 Lb.
 

Silver Member
Username: Andrew571

Stillwater/Edmond, Oklahoma USA

Post Number: 231
Registered: Oct-05
send it back under warranty..

did u ever visually look @ the alternator while the engine was running, u should have noticed if the pulley was messing up, or at least hear it
 

Silver Member
Username: Rvlacos

DD 3512 United States

Post Number: 435
Registered: Sep-06
montana? wtf?
 

Silver Member
Username: Leew

jennifer contreras , Yokosuka, ... SPESNAZ. I...

Post Number: 852
Registered: Jan-06
Andrizzle ! HE cannot "hear it"....music always TOOO....DAMN....LOUD !!!! LoL
 

Silver Member
Username: Rvlacos

DD 3512 United States

Post Number: 439
Registered: Sep-06
montana ur annoying!
 

Silver Member
Username: Grebnereon

Post Number: 498
Registered: Mar-06
how is that man? she just knows what shes talkin about. whats wrong with that?
 

Silver Member
Username: Rvlacos

DD 3512 United States

Post Number: 452
Registered: Sep-06
bump!
 

Silver Member
Username: Grebnereon

Post Number: 500
Registered: Mar-06
hey richard, i think me and you are the only people on here.

im mostly just reading though,and not posting.
 

Silver Member
Username: Rvlacos

DD 3512 United States

Post Number: 458
Registered: Sep-06
its not that its the changing the name all the time, all that sh!t under her name, the bs from the other categories, the usless pics, posting a hundred times about nothing just to get gold! it gets annoying and im not the only one who thinks so! now when she helps like she did in this thread its great but all that other bs can go!
 

Silver Member
Username: Grebnereon

Post Number: 503
Registered: Mar-06
oh ok, i can see where you are comming from now.
 

Gold Member
Username: Adddisorder

West palm, Florida

Post Number: 1899
Registered: Jan-06
um this is funny my thread seems to be turning into a jen is annoying thread.

well anyway my belt was not over tight or loose there is just something wrong with the alt. so yes i am sending it back. unfortunatly my stock alt. is compleaty dead so i have to spend 140 on a new one to use for 2 weeks.

oh and jen where do you get those little diagrams?
 

Silver Member
Username: Leew

jennifer contreras , Yokosuka, ... SPESNAZ. I...

Post Number: 853
Registered: Jan-06
oh and jen where do you get those little diagrams?


from my comp! BTW if you need any info (about your car)! just PM to me..I will be glady to help you!!!
 

Gold Member
Username: Adddisorder

West palm, Florida

Post Number: 1909
Registered: Jan-06
haha but like you didnt get them from a website or anything? iv got a teardown manual of my car that has tons of pics and stuff but just wondering, that could be good info to have for back up
 

Silver Member
Username: Leew

jennifer contreras , Yokosuka, ... SPESNAZ. [...

Post Number: 858
Registered: Jan-06
one more for ya!

Upload
 

Gold Member
Username: Adddisorder

West palm, Florida

Post Number: 1915
Registered: Jan-06
hey actually do you ahve any close ups of the throttle body assembly and stuff?
 

Gold Member
Username: Adddisorder

West palm, Florida

Post Number: 1916
Registered: Jan-06
ERR BUMP
 

Silver Member
Username: Leew

jennifer contreras , Yokosuka, ... SPESNAZ. [...

Post Number: 859
Registered: Jan-06
yeah I got,but everything separate.Its depend which sensor you need!

FOR EXPL.
Upload
------------------------------
Upload
 

Gold Member
Username: B101

DD, RE, FI, TREO, KICKERUSA

Post Number: 3935
Registered: Sep-05
im sure he does, he has the mechanic software... :-) I know, cause I have these software too... any car make or model..

but ya, get your alternator replaced!
hope its under warranty!
 

Silver Member
Username: Leew

jennifer contreras , Yokosuka, ... SPESNAZ. [...

Post Number: 860
Registered: Jan-06
B...you forgot....any submarine! and any aircraf!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us