I have 2 rockford p3s... and audiobahn a8002t....Quick Q

 

Silver Member
Username: Quig

Pittsburgh, Pa Us

Post Number: 261
Registered: Sep-05
obviously im underpowering this like hell.. so im wondering, do u think i culd get another audiobahn a8002t, and wire 1 sub to each amp... at 2 ohms which will put out "800rms" to each sub... the subs r rated 500rms... there rockford so there underrated... and audibahn is obviously overrated, wat do u guys think will i burn them or culd i turn them down a bit? is it possible in any way
 

Gold Member
Username: Logan__tille

AudioqueUSA

Post Number: 2146
Registered: Feb-06
if the audiobahn is over rater, its not by much.
 

Gold Member
Username: Logan__tille

AudioqueUSA

Post Number: 2147
Registered: Feb-06
overrated***
 

Silver Member
Username: Steve_collins

Post Number: 218
Registered: Dec-05
its not overrated it actually puts out what it says
 

Silver Member
Username: 420alldaylong

Post Number: 667
Registered: Sep-06
Since when!
 

Gold Member
Username: Tjmutlow

Post Number: 3111
Registered: Sep-05
i hope those are the dual 4 ohm version seeing that amp is a 2 channel and your running at 4 ohm bridged
 

Gold Member
Username: Tjmutlow

Post Number: 3112
Registered: Sep-05
or 2 ohms stereo mode, and those subs would not see"800wrms per sub, from that amp.
 

Silver Member
Username: Quig

Pittsburgh, Pa Us

Post Number: 263
Registered: Sep-05
ok but wat im askin is can i run 1 amp to 1 sub... bridge the amp @ 4 ohm so it puts out t "800wrms" or will i blo the subs.
 

Gold Member
Username: Tjmutlow

Post Number: 3115
Registered: Sep-05
first off if those subs are dual 4 you can not run 1 to 1 amp, ohm load is to low for the amp, it is only stable 4 ohm bridged. the only way you could run that if those subs were the dual 2ohm version.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us