hi everyone i was away for 3 days and now i came back home and entered the keys posted by BLAZE. but its still not working. on my screen i keep getting the msg WAIT FOR PICTURE can someone help me pleaseeeeeeeeeeee!!!
wasim you still probably have the older bin so make sure your autoroll is turned off, the only thing you want on is the keycode turn everything else OFF and with the following keys you should get all the channels
Wasim: If you have installed a new BIN in the last 10-15 days, you are OK. The new Keys should do the trick. For fine tuning and minor improvements you may want to install the latest BIN out last couple of days. If you want to converse more, you should post the name of your receiver and the BIN and whether you were up and running, and when.
nalin: i downloaded a bin file on sept 29 and since then ive been inputting keys only. i have a fortec lifetime ultra. if i have to download another bin file now........i have to wait a week cause the guy who installs the bin file for me, he's on vacation.
I HAVE A PANSAT 4 DISEQ AND IT WAS SUPPOSLEY WORKING WITH NAGRAVASION, AND EVER SINCE THE LAST TIME THE TV WENT OUT THE CHANNELS HAVEN'T CAME BACK WITH ANY OF THE CODES WAT SHOULD I DO? I HAVE TURNED THE AUTOROLL OFF ALREADY.
Wasim: What you are telling me that you were actively watching TV and the Indo/Pakistani channels since putting in the BIN on 29th Sept. All you had to do was to put in new keys. Is that correct and what is the name of your receiver?
Blaze: see my posts above regarding the three Indian channels - you have to rescan doing a blind scan, and make sure you make appropriate changes in your favourite list after rescanning
yup after sept 29th i haven't downloaded a bin file. ive just been entering keys since then. but for a week now my channels zeetv, zeecinema and b4u haven't been working. but the rest of the channels have been working. I have a fortec lifetime ultra
Wasim: If it is just those three channels, then you have to do a blind scan only. Your BIN would probably be a 279T, which is OK right now till next week when you can update to 281T if you want to. Are you getting SET,PTV,QTV,Aajtak,, etc? When di you get these last or name the channels you were getting a couple of days ago besides the three you mentioned. Again, if it is just those three channels and others are working, you WILL get them after a Blind scan
ive done already a blind scan like everyday but those 3 channels don't work at all. but anyways lets forget those 3 channels. i want the rest of the indo/pak channels and the keys mentioned above, ive entered with the autroll off but it still doesn't work.
Wasim: you have identified the issue, as NOT that of new TPs for three channels, but a general failure even after putting in the keys. Check list: 1. Turn the receiver off manually at the back and after 30 seconds turn it on again. 2. Set the system clock to the correct time and time zone. 3. Keeping the autoroll off, reckeck both sets of keys. Earlier today, people were getting one number wrong in Key 01, even after changing it to the correct number, so make sure both Key 00 and 01 are absolutely correct and saved with autoroll off. 4. Make sure you are putting in the correct ID. DN is 0101 ID. Bev is 09 01. The keys for each are different. Your Indo-pakistani channels are on DN - probably on 61.5W (Echo 3) 5. Check FTN and see if it is working.
FYI...I have posted the current keys and do KEEP my autoroll ON, which did autoroll the new keys today..but U can all listen to whoever u want here!...some here (nalin and another) are posting contradictions (but inserting copy/pastes of my posts into their posts, which I find humorous Nalin...LOL) to my posts based upon their dislike for me (due to Nalin providing bogus info many times before..which myself, PRFRMNJ and a few others "discussed" with Nalin) , and not for factual info purposes!...
Nalin...back off...U continually STILL post BS bogus posts and now tell people to basically NOT belive me...when U know I never post BS bogus info!....grow up!...I'm here to help others, not be a "star" like U think U are..
Nalin your attempt to belittle me by saying the below is leading people to believe that MY posts, keys and instructions are NOT CORRECT..which is totally NOT True, if U know anything about DSS..
Nalin Nyda Silver Member Username: Nydas
Post Number: 701 Registered: Jun-06 Posted on Sunday, October 15, 2006 - 09:53 pm:
-------------------------------------------------------------------------------- Thunderbird and The One have given the correct keys and instructions. Keep the autoroll off as instructed and enjoy TV. When everything is fine with the autoroll he will let you know and give you the appropriate advice.
LK: Keep out of this thread. I have my autoroll off and things are working fine. I had in on for a while this afternoon and me AND OTHERS had problems. You read nothing and just jump in. What was the point in posting a long key list, when people before you had already posted the correct keys. So I say to you, go back to your fifty threads you want to work in and let The One and others help people in this thread. Stop belittling me. If people want your advice, they will find you or post a different thread for advice. This thread was working very well and you suddenly jumped in with your rudeness. Keep your comments and your rudeness in other threads and get out of this thread. People want to be helped in the most minor details and there are people other than your gold self who can do it. SO GET OUT OF THIS THREAD AND KEEP OUT.
LK what do you think of yourself anyways... You are a gold member that doesn't mean you are the only one here knows everything.... just keep out of this thread and mind your own freakin business.... people on this thread are not as smart as you so let us help them out...PEACE!!!!!
here are the latest ones!!! Due to some people having older bin files, keeping auto roll on doesn't give you your channels back so make sure your autoroll is turned off, the only thing you want on is the keycode, turn everything else OFF and with the following keys you should get all the channels
I have found in many instances over the last 2 years that you need to try a number of inputs if the first doesent work for you, and that is a constant.
I have read LK posts on many sites some I didnt agree with, but one thing for sure LK has a lot of info which has benifited me over time
Nalin,who the fukc do U think You are to tell me to GET OUT!...this is a free public place, and I was here YEARS before U had pubic hair!..and EVERYTHING U post here is a copy/paste of my posts with your own added bogus info thrown into it....U have NOTHING original!..I am a well established known person for many years in the DSS world, U are a complete unknown noob!
I guess the new leaders (Nalin and The One) here have their own agenda, "power tripping", and don't want any input being posted by others like myself!...but both have no problem copy and pasting my posts and info and then putting their names on it!
Derry C: I do not know exactly what you mean by STA-61. T-5KU has a full range of International channels from the Eastern direction - Arab channels all the way to Japan. If you want to compare with Echostar 3 (61.5W) International channels, the main difference is the presence of Z network on Echostar 3. To many a viewer, these channels give better entetainment value than the government type of channels on T-5-KU (Doordarshan, etc.) To scan T5-KU, you will need a dish at least 30" in diameter, and special LNB. Also, note that scanning any satellite requires that you are properly pointing to it in longitude and in the up/down tilt. The mere fact that it is listed in the antenna directory of your BIN, and even if it is showing a signal stregth, does not necessarily mean that you are pointing to that satellite. Thus, if you are pointing to 61.5W, you will see a signal stregth on many other locations listed in your software, but any of that setting will result in scanning the 61.5W. I hope this information helps.
I am not a leader, nor a blind follower. I have known and written BIN/BIOS level software for 30 years, and have kept up my knowledge over the years. The One AND SOME OTHERS discovered that many posts were related to problems created by DN tweaking one number out of the 16 in a key. They discovered by TESTING that if you turned off autoroll, etc., you got all channels nicely. THE PURPOSE OF THE EXERISE IS TO HAVE THE MAXIMUM NUMBER OF VIEWERS VIEWING WHAT THEY WANT TO WITH THE LEAST CHANCE OF MISTAKES AND BLANK SCREENS. The One and many others are doing an admirable job in keeping with their self imposed prime directive.
LK We know that you have alot of experience and have alot of information to share with all of the other users, but on this thread there are alot of people who are new to this thing so questions that are cheap to you could mean a lot to others so let us help them out with little things and you have all the right to post on this thread too, but don't blame people for copying and pasting you stuff cuz there are alot of other people here who know this stuff. You are not the only Master!
carola...just enter both the DN keys as usual..usually only 1 key is active, after DN just did changes in that air stream and changed to a new key, which whys its referred to as "active"....
When Both keys are active, which is rare, it means that DN or Bev, is actually doing something with BOTH keys in the airstream, but not necessarilly changing both keys..in the past when BOTh have been active, it has caused people to loose more channels than usual, but thats not the case this time..
BTW...U better hope that U don't piss off your new leaders here at Ecoustics, Nalin and The One, here by asking me any questions...they have thin skin and big ego's..they will attack U next!
I am one of those who do reading much more than writing and I only do this because I want to expand my knowledge. Using bad language, specially by a senior member like LK is not very much appreciated. LK people (including myself)count on you, Nalyn and The One. Please keep your respect up and let "language sensative" people participate in this forum. Thanks.
I have quick question from you nice people. Ariza 750 is running on 281e and now there is a new one 282e. Could someone please tell me what is the difference. 281e does auto roll perfect and so far only problem is picture freezing. Thanks again.
LK why are you taking this so seriously, its not that big of a deal. lets just all help eachother out with all the info we have got, so it benifits others.....there are no leaders here some people just have more experience than others that doesn't mean anything, and we all know that you are probably the most experienced with all this stuff more than anyone else in these forums but lets just not make this a big deal and keep helping others like we have always been...
Sam I havn't tested the bin file but these updated bin files usually are inproved bin files if your bin is working fine for now i wouldn't bother downloading the new one but they do fix itsy bitsy stuff on it so if you are interested you can give it a go!
hi nalin i finally got the new bin loading on a disc now can you tell me how to load in my panset 2500a i have the 281 file i need step by step have been taking heart meds and seem to have lost most of my ways to do things
1) Go to Parental Control, then go to Autoroll option at the bottom 2) Change Dishnest Autoroll to OFF, 3) Keep KeyCode on the first line ON 4) Exist to previous menu, then go to Nagravision 2 5) Change the new keys:
*** FOR MEGASATPRO, COO*LSAT, COOLTECT
1) Press MENU, goto Autoroll Options in Installation
2) Change Echostar Autoroll to "DEACTIVE"
3) EXIT, then press 8282 to change keys menu
4) Make sure CAS is Nagravision, Ident is Dish network (0001)
LK why are you taking this so seriously, its not that big of a deal. lets just all help eachother out with all the info we have got, so it benifits others.....there are no leaders here some people just have more experience than others that doesn't mean anything, and we all know that you are probably the most experienced with all this stuff more than anyone else in these forums but lets just not make this a big deal and keep helping others like we have always been...
I do agree with you, The One. Let's not fight, friends. I know that LK is a very good person, but I have no idea wy he got angry.We're here to help each other. All are the same, no one's better than the other.And whoever is saying nonsense to LK, please stop it right now! He's a good guy cuz he helped me and told me how I can load bins into my reciver by myself and that why i m saving money. LK, you know who I am, right? I am you friend Asharfi Vig. I just shortened my name.
I have Fortec Lifetime Ultra and it's working fine with bin 279T. I visited DssCommunity* and I checked that there's new bin for FLU 281T. I know that bin 280T is a EPG Fix bin, but what's different in bin 281T. Please reply soon.
larry kirkland sorry i wrote down null modem in my previous post its actually straight cable my mistake ... my hand type faster than my brain works lol...
Downloading Procedure for Pansat 2500A
1. Connect satellite receiver to PC with RS-232C Straight cable (Not Null Modem).
2. Turn on the power of the satellite receiver.
3. Open the Loader
4. Click "STB MODEL" and type model name exactly - Pansat 2500A.
5. Click "BIN FILE" and select the bin file you want to download then click "Download".
6. Do not interrupt while downloading.
7. Press OK after download complete; satellite receiver will reboot by itself. Do not interrupt satellite receiver until reboot by itself
The One... 1-Is there different loaders for different receivers? 2- where can I download a loader? 3- For ROM 102 Cards what do I need in terms of hardware and software? For the software can I get it off the web?
Nalin Nyda, For manually inputting GLOBECAST keys to C00LSAT 5000, from Nagravision 2 I don't see "0C 01" to input keys. Can anyone help with this issue for T-5-/KU.(IA5/KU)
THere are alot of sites where you can download the bins and loaders from here are some: www.dssevolution dot com www.dsstester dot com www.totalfta dot com
Well now my posts are being deleted...so why should I bother posting...U can all thank Nalin and The One for that!...I didn't break any rules here, just had a beef with them...so 1+1 = 2 still in my book...they MUST have something to do with Ecoustics and everything to do with deleting MY posts, but NONE of their posts!...there is NO other explanation to any LOGICAL person....I said it before, they are "power trippers" and will use all their abilities to stop me from posting!
I'm sure they will leave this post alone, so The One and Nalin can deny these facts by me, and make themselves look good , while bashing me, all at the same time..mark my words!
Well I was ALMOST 100% correct...sorry, I only got 4 out of 5 correct!
1..the post remained and did not get deleted this time 2..The One did reply 3..he tried to make himself look good and more mature than me 4.. and I got bashed
The ONLY part I got wrong was ...he did NOT DENY anything!...so 4 out of 5 was right on the money!...and I called it, before The One posted!...so bash me all U want, but I do know what I am talking about!
Re Fortec Lifetime ultra bines. I stop downloading bins in mi FLU.With the autorroll OFF , my receiver still continues changing the funnmy keys, I'll wait for a releable Bin. In the other hand my pansat2700a y VS Xtre*e are doing okey,the 279 bin por pansat2700a is OK.
I know Nalin, its cool, i just tried my best to keep everything the way it was but some people have a serious attitude problem and also they will behave as a kids for there whole life even though they are 55 years of age... they just wanna be one of those comic heroes but what can i say man behaving like a kid is gonna do shitt all for ya!
I downloaded the 280 bin for my fortec ultra, it dosn't works ,even with the autoroll off, it keeps changing keys, Now I have to go back to 279.I read about 281 y 282 that they aren't working well, I need iformation from someone that are using those files for download it to my older FLU.
JPZ some times these softwares do take a while to update the keys go to dssevolution*.com (remove *).On the right side it gives you the updated keys, and it usually updates it right after the keys get changed. some time these softwares
These Keyfinder utility programs are created and linked to their specific Dss sites...If the specific site owners do NOT input the key changes, then the keyfinder utilty (such as Key Ripper = Dssevolution, Key Master = Dsscentral,) does NOT get updated..
I believer Key Grabber located at www.gat-s.biz is the best of all...and gets the keys posted from 4 different DSS sites, so its like having 4 different key finders in one...and is NOT associated with gat-s..
HELP!!!!!!!!!!! Mc Sunny !!!! I did that! downloaded the new bin, but it worked for only a day or two, now its gone again what am I doing wrong..!!! Please help me out!!
I really appreciate your help. Its reagarding the 457 (cricket Channel)....
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Achsah there is a Updated Version for Pansat 2700A Here is the link to it http://www.dssevolution.com/forums/showthread.php?t=82298
-This Temp Auto Roll Fix Dn\Bev...Make Sure u have autoroll on and put on cnn channel and let the keyroll..
If thats the only channel not working for you then try to switch you receiver OFF from the back and turn it back ON see if that helps, and also try to do a blind scan as well that might help
what am I doing wrong..!!! Please help me out!!