Bronze Member Username: Bsman
Sarnia,
Ontario
Canada
Post Number: 13
Registered: Sep-06
|
Posted on Im wonderin what to tune an infinity 12 inch SVC 300rms to in like 2 or 3 cubes? |
Silver Member Username: Denali_on_22s
Maryville,
TN
Us
Post Number: 253
Registered: Feb-06
|
Posted on depends on whether you want low or loud bass... that infinity probably wont get very low so id tune it around 36-38, 40 for the most SPL |
Silver Member Username: Renegadesrun
Lafayette,
IN
US
Post Number: 124
Registered: Oct-04
|
Posted on FS of the sub? |
Bronze Member Username: Bsman
Sarnia,
Ontario
Canada
Post Number: 14
Registered: Sep-06
|
Posted on ok so if i want it as low as i can get it i should try like 36? |
Bronze Member Username: Bsman
Sarnia,
Ontario
Canada
Post Number: 15
Registered: Sep-06
|
Posted on FS? |
Bronze Member Username: Bsman
Sarnia,
Ontario
Canada
Post Number: 16
Registered: Sep-06
|
Posted on Im reading the manual an it says i can tune it to 33 in 2 cubes |
Silver Member Username: Renegadesrun
Lafayette,
IN
US
Post Number: 125
Registered: Oct-04
|
Posted on One of the "thiele small (t/s) parameters".
Roughly put its Resonant frequency... the frequency the subwoofer most easily resonates at and also a number which i would recommend not tuning below.
Which apparently is common in here as incorrect amp adjustment judging by the amount of subs that "knock" when putting the power to them. |
Silver Member Username: Renegadesrun
Lafayette,
IN
US
Post Number: 126
Registered: Oct-04
|
Posted on When in doubt......follow the manual. |
Bronze Member Username: Bsman
Sarnia,
Ontario
Canada
Post Number: 17
Registered: Sep-06
|
Posted on well, it says i cant tune it below 28 but it recommend tuning it in 2 cubes to 30 more like 33 i would think at least |
Bronze Member Username: Bsman
Sarnia,
Ontario
Canada
Post Number: 18
Registered: Sep-06
|
Posted on is that what i should do?? |
Silver Member Username: Renegadesrun
Lafayette,
IN
US
Post Number: 128
Registered: Oct-04
|
Posted on 32-35 IMO, are great for all around streat beating. In essence....I agree with the manual. |
Bronze Member Username: Bsman
Sarnia,
Ontario
Canada
Post Number: 19
Registered: Sep-06
|
Posted on ok then thats what i will do thanks a lot for the help |
Bronze Member Username: Bayrent88
Ingleside,
Texas
USA
Post Number: 41
Registered: Jul-06
|
Posted on what is a good site to use for the calculate box ports |
Silver Member Username: Adddisorder
West palm,
Florida
Post Number: 953
Registered: Jan-06
|
Posted on subwoofertools.com |