Help with 119

popo grow New member Username: Popogrow Post Number: 4 Registered: Jul-06	Posted on Sunday, July 09, 2006 - 07:09 GMT I got from Ebay a Dish Network Dish 500 Dish W/Legacy Twin LNB FTA about a week ago and I cant seem to get 119 all I get is 110 what am I doing wrong I am using a 4x1 DiSEqC 2.0 Switch one to 110 and 4 to 119 and on a cool sat receiver
Moe Bronze Member Username: Moe948 Post Number: 62 Registered: Jun-06	Posted on Sunday, July 09, 2006 - 07:12 GMT No point in trying for 110 or 119. Almost all the channels are dead on those two. Try looking for 91 and 82 which still have a lot of channels open.
popo grow New member Username: Popogrow Post Number: 6 Registered: Jul-06	Posted on Sunday, July 09, 2006 - 07:15 GMT thank you
Moe Bronze Member Username: Moe948 Post Number: 65 Registered: Jun-06	Posted on Sunday, July 09, 2006 - 07:17 GMT Well, they are dead.. but if you have the a receiver with a card slot and a rom 102 card then 110 and 119 are still open.
Rob Mika Silver Member Username: Woofy Ontario Canada Post Number: 258 Registered: Feb-06	Posted on Sunday, July 09, 2006 - 14:41 GMT popo grow..your setup is wrong..your legacy twin has a built in switch..so you do not need to use the disque switch...just run one rg6 cable from the lnb straight to your cool*sat and use these settings. 119 lnb power - on lnb type - legacy twin LNB1 lnb freq - 11.250 22 khz - off disque switch - 1.0 committed - 1 legacy sw - off 110 lnb power - on lnb type - legacy twin LNB lnb freq -11.250 22 khz - off disque switch - 1.0 committed - 2 legacy sw - off lnb from 119 to disque swtich port 1 lnb from 110 to disque switch port 2
Rob Mika Silver Member Username: Woofy Ontario Canada Post Number: 259 Registered: Feb-06	Posted on Sunday, July 09, 2006 - 14:43 GMT oh yea..110 should be legacy twin lnb2
popo grow New member Username: Popogrow Post Number: 7 Registered: Jul-06	Posted on Sunday, July 09, 2006 - 15:22 GMT Will do thank you fot the info.
popo grow New member Username: Popogrow Post Number: 9 Registered: Jul-06	Posted on Sunday, July 09, 2006 - 15:24 GMT Will do, Thank You for the info.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us