I have the 110, 119, and 148 sat signals all coming through one coax cable. Is it possible to split the signal in the coax cable two ways and still receive all three sats on both coax cables. If so, what do I need? I tried regular splitters but they split the three sats and separate them two different ways.
I have dish network dish with three eyes on it. It's set up to where all three sat signals from each eye is traveling through one coax line. So I'm trying to split the line two ways with out losing any of the three sat signals.
Yes, it seems to have an internal switch. I want to split the signal in the cable that is carrying the 3 sat signals to run to 2 receivers. A standard splitter splits the sat signals up to where you don't get all three split two ways.
sounds like you already have a dp34 switch hooked up . it;s a big squre box probably mounted to the pool under the dish you just need another cable and hook it to a "to reciever" output if not you probably running a DISEQC switch and need to upgrade to a dp34 $40 Bucks solves your problem.
I might be wrong, but I don't think that lnb will work the way you want it to with FTA. You may need to get another brand of lnb along with a 4-port disecq switch.