|
New member Username: One2envPost Number: 1 Registered: Jun-06 | Hey guys is a Pansat 2700 N2 clone safe bin? if so can some one please tell me where it is. Thanx in advance |
|
Gold Member Username: LklivesPost Number: 3327 Registered: Jan-06 | that is a receiver!....LMAO |
|
New member Username: One2envPost Number: 2 Registered: Jun-06 | srry what i meant was is there a clone safe bin for that reciever? |
|
Gold Member Username: LklivesPost Number: 3333 Registered: Jan-06 | yes here..272v1 bin [link removed] |
|
New member Username: One2envPost Number: 3 Registered: Jun-06 | Thanx a lot LK by any chance do you know what loader i should use, BL loader or GTRom Loader? Thanx a lot |
|
New member Username: One2envPost Number: 5 Registered: Jun-06 | Thanx a lot LK by any chance do you know what loader i should use, BL loader or GTRom Loader? Thanx a lot |
|
Gold Member Username: LklivesPost Number: 3355 Registered: Jan-06 | Loader doesn't matter...whatever one works for U..loaders are like cars...some people, bins, receivers, prefer certain ones..but they all do the same thing!...and there is NO telling which bins or reciver prefers which...I prefer BL updater V 1.4 myself! |
|
New member Username: Slimatic84Post Number: 5 Registered: May-06 | Sir,: LK I need your help! I am having problem with my ANTENNA SET UP. 2 - DISH 3 - LNB SATTILITE: 61.5, 119 & 110 I am only getting 110 & 119 on my Pansat 2700a. can you send me SATTILITE SETTING on all three of the above if you are running the same set up like mine or your advice. *** ALL DISH IS POINTED CORRECT & CHANNEL LISTING 119, 110 & 61.5 WAS DONE ****; ***** BECAYSE MY FORTECH NA BOX IS WORKING PERFECT *** |
|
Gold Member Username: LklivesPost Number: 3421 Registered: Jan-06 | all settings are the same...except disque switch ports 119...1 110...2 61.5..3 Maybe the 61.5 has bad cable, poor connections, bad port in disque switch, bad LNB, misaligned LNB..or old channel list where the 61.5 channels have moved to another transponder or satellite.. |
|
Bronze Member Username: LadaMontreal, QC Canada Post Number: 40 Registered: Jun-06 | LK. Can I use Loader BL 1.4 for Digiwaiv 7000? Thanks. |
|
New member Username: Slimatic84Post Number: 6 Registered: May-06 | LK, thank you very very much for that info, however where can I find a recent CHANNEL LISTING for 119, 110 & 61.5 as you see I am new but I am a very quick learner. I thin the one I am running at home was since in 02/06. |
|
Silver Member Username: The_wank_artistPost Number: 898 Registered: Feb-06 | L'sean, Go to dsscentral*net to get a new channel list. You'll still have to edit it as the last posted was from April or May, and there have been changes since. There is a newer channel list there too but when I tried downloading it the other day it failed to download. You can use either of these sites to help you with the edits. http://www.lyngsat*com/ where * replace with . |
|
Gold Member Username: LklivesPost Number: 3422 Registered: Jan-06 | Many Channels lists at |
|
New member Username: Moyo18Post Number: 1 Registered: Jun-06 | i have a problem with the pansat 2700-n2 when i downloaded the bin for pansat 2700 it worked great but then the box didnt work, there is not power at all. what is the problem?. |
|
Gold Member Username: LklivesPost Number: 3430 Registered: Jan-06 | U used the 272 bin and killed your CLONE 2700 receiver...U now must Jtag it...U should have used the 2700 CLONE safe bin 272v1...shame on U.. |
|
New member Username: Moyo18Post Number: 5 Registered: Jun-06 | what "Jtag" means?? |
|
New member Username: Moyo18Post Number: 6 Registered: Jun-06 | i have the bin for pansat 2700 n2 but when im trying to donwload the bin to the receiver i cant do that, the problem still with the power so what can i do? i have to buy a new one or can i repair it? |
|
New member Username: One2envPost Number: 10 Registered: Jun-06 | Dude u have to jtag your reciever first then load the bin there are few things you can reat about jtaging at dsstester.c*om, basically jataging puts ur reciever in clean "fresh" state. Then you have too put in the bin (software) in too the reciever for it to function. |
|
New member Username: LilydaviePost Number: 2 Registered: May-06 | PLEASE HELP I'M NEW AND DUMMIE. I HAVE PANSAT 2700A 1 DISH TO 110 OTHER DISH TO 119. I RUN THE BLIND SCAN FIRST WITH DISH 110, AFTER THAT RUN SCAN WITH DISH 119. AFTER THAT I INSTALL THE SWITCH AND PUT TOGETHER THE TWO SIGNALS TO THE RECEIVER. NOW I HAVE A BUNCH OF CHANNELS, ALL IN ANY ORDER, MANNY DUPLICATED. I WANT TO KNOW HOW CAN I PUT ALL IN THE ORDER THAT YOU FIND THEM IN THE NETWORK, WITH THE SAME CHANNEL #. I HAVE THE PANSAT2700A CHANNEL EDITOR 1.8.7.1261 BUT I DON'T KNOW HOW USE IT. THANKS IN ADVANCE CARLOS |
|
Gold Member Username: EvadelparaisoPuerto Rico Post Number: 1037 Registered: May-06 | go to dss**tester.com download the guide to channel editor. In your remote go to SAT, Echostar package, hit twice. You can view the list as DN have. Go to edit channel and you can edit, delete etc the channel list. You can too Delete all channels Go to menu, Installation, Satellite scan, Select all satellite (3),(you will see in red the button when you select the satellite to scan) and hit ok to scan all satellite at the same time. If you select this option you dont have duplicate channels. But master channel edit its a great program. |
|
New member Username: PeortizPost Number: 1 Registered: Jun-06 | Im trying to wrtie the bin for the first time on my receiver but it fails every time. I have a Pansat 2700A and Im using a RS 232 cable that says null modem. Im using the GTRom Loader v.3.38 with the Bin File: X_87BL_060609_272_api_2. Im new at this so please Help! Thank YOU ALL! |
|
Gold Member Username: EvadelparaisoPuerto Rico Post Number: 1045 Registered: May-06 | Pedro: Change the bin to: Pansat-Clone 2700 272v1 if you still have the same problem change to straight cable. Lucky dss**tester.com Pansat area |
|
Silver Member Username: BoycePost Number: 273 Registered: Apr-06 | Pansat 2700-N2 jtag kit Here's a kit consisting of how to make a jtag cable with pictures, the software, & a "how to" use the software with screenshots If making your own cable and you have a ten pin header, substitute the following schematic to the 20 pin how to: pansat 10 pin layout: 2 4 6 8 10 1 3 5 7 9 hs1 10 pin cable schematic: DB25 pin2------100 ohm resistor ---> Pin 4 DB25 pin3------100 ohm resistor ---> Pin 3 DB25 pin4------100 ohm resistor ---> Pin 1 DB25 pin5------100 ohm resistor --> Pin 8 DB25 pin13----100 ohm resistor----> Pin 6 DB25 pin18 to 25----------->GND Pin 9 download software and file below. |