BEV is back
|
Silver Member Username: WoofyOntario Canada Post Number: 129 Registered: Feb-06 | Am told that bev is working again, apart for the PPV and XXX..just give the keys time to roll. |
|
Bronze Member Username: Micklee11801Post Number: 15 Registered: Feb-06 | what is need to do? do i have to load a new bin? I have pansat 2700a. thanks. |
|
Silver Member Username: WoofyOntario Canada Post Number: 130 Registered: Feb-06 | same bin as before the way i understand it. |
|
Gold Member Username: Maple_leafPost Number: 1429 Registered: Apr-05 | O= 98F744AC5E07D9ED 1= 8AFF3B7E6571F94E Active BEV keys |
|
Bronze Member Username: TariqicPost Number: 13 Registered: May-06 | Aren't there supposed to be another 2 set of keys? |
|
Gold Member Username: Maple_leafPost Number: 1430 Registered: Apr-05 | they only change 1 set at a time!!!!!!!!! |
|
Gold Member Username: Maple_leafPost Number: 1431 Registered: Apr-05 | ACC2E13000A1C8540CB63162CA382FCB Here is the others sucky. |
|
Bronze Member Username: TariqicPost Number: 14 Registered: May-06 | my bad, sorry. |
|
Gold Member Username: Maple_leafPost Number: 1432 Registered: Apr-05 | LOL n/p dude |
|
Bronze Member Username: TariqicPost Number: 15 Registered: May-06 | so you gettin' all the channels now? That's awesome. |
|
Gold Member Username: Maple_leafPost Number: 1433 Registered: Apr-05 | NO still no ppv or vu. |
|
Bronze Member Username: NorthmanPost Number: 30 Registered: Mar-06 | PPV are back too, now. Ariza Xtreme did not autoroll, so key in current keys as shown in Maple Leaf's post at 1:39...worked for me...see what happens next...game on! |
|
New member Username: Ds_edmPost Number: 1 Registered: May-06 | thanks maple leaf. all BEV channels are back |
|
Bronze Member Username: Pirate_petePost Number: 11 Registered: May-06 | I did a factory reset,blind scan and all chan blkout.CTVc I get only audio while it scan wait for picture! I'm using bin 148 on 2700a.Bev is dead.Waiting for fix and getting impaitent! |
|
New member Username: MinicooperPost Number: 1 Registered: May-06 | Hi, I have a cool sat 5000, all my channels are black. I found the new code but I can't figure out how to add the new code into the system. Can someone please help me out. |
|
Silver Member Username: HamtecPost Number: 432 Registered: Jun-04 | You guy are too much!!! I have been doing this for years and since ECM I have been reading on all sites of inportants. I have learned that yes bev is dead ECM intended to render FTA useless. They may have just done this. Impaitents well then pirate pete you should sub. Remember what bev does DN will soon follow. |
|
Silver Member Username: HamtecPost Number: 433 Registered: Jun-04 | No PPV or Prn on bev then why test bev. |
|
Bronze Member Username: Pirate_petePost Number: 15 Registered: May-06 | Colin; Their already doing it (DN copying BEV) and it's dieing as we post. |
|
Gold Member Username: Maple_leafPost Number: 1437 Registered: Apr-05 | You guys should wake up and smell the roses. As of 4:00 all of Bev was back up. And yes Dish has dropped a few channels, mainly xxx. But it could be a key change. You keep screaming the Sky is Falling, you'll probably be the first one it hits in the head. |
|
New member Username: MinicooperPost Number: 2 Registered: May-06 | Thanks alot Maple Leaf for the code. I'm back up and running. PPV is even working. Thanks again |
|
Gold Member Username: Maple_leafPost Number: 1440 Registered: Apr-05 | Your welcome |
|
New member Username: Shak4031Post Number: 4 Registered: May-06 | Can someone make the code posted by Maple easier to process: I tried ACC2E13000A1C8540CB63162CA382FCB under 1 but it didn't work. |
|
New member Username: Shak4031Post Number: 7 Registered: May-06 | Got it working, thanks... |
|
Bronze Member Username: Raging_fisherPost Number: 27 Registered: Feb-06 | I had everything without having to do anything. About 10 minutes ago though, every channel went black. |
|
New member Username: HeffmanPost Number: 1 Registered: Feb-06 | ya bev is still playing games I got no channels now ...had them all this afternoon |
|
New member Username: MinmikePost Number: 6 Registered: Apr-06 | can someone help?i have 4 lines for bev can someone tell me which keys go in which line.thanks! |
|
New member Username: BurkanPost Number: 5 Registered: May-06 | Do the Keys work on all boxs? I have the Starcruiser9000. Also what is BEV keys? |
|
New member Username: Main420Post Number: 2 Registered: May-06 | I see 4 sets of keys, but I dont know what order i have to insert...plz help |
|
New member Username: NalbouzPost Number: 8 Registered: Oct-05 | hello John Spartan : Please let me know how you got it Key oo: ?? Key 01: ?? thank you |
|
New member Username: NalbouzPost Number: 9 Registered: Oct-05 | I put key 00: 98F744AC5E07D9ED 8AFF3B7E6571F94E and key 01: ACC2E13000A1C854 0CB63162CA382FCB still nothing, please help |
|
Bronze Member Username: Nick32058Asdfvafdsv, QC Sdv Post Number: 19 Registered: Mar-06 | Can someone please explain,how to enter new keys for BEV and what is the provider ID for BEV Thanks. For Pansat2500a. |
|
Bronze Member Username: Raging_fisherPost Number: 28 Registered: Feb-06 | Doesn't matter what set of keys you punch in, we're in total darkness right now... Have to hope there is some sort of fix on the way... I hear emulation is still up and running nicely. |
|
Bronze Member Username: Nick32058Asdfvafdsv, QC Sdv Post Number: 23 Registered: Mar-06 | I steel need to know how to input the keys Can you help? |
|
New member Username: NalbouzPost Number: 10 Registered: Oct-05 | I post at 10.42PM and let it roll. guess what, i got all bev channels lol |
|
Bronze Member Username: Nick32058Asdfvafdsv, QC Sdv Post Number: 24 Registered: Mar-06 | Can someone please explain,how to enter new keys for BEV and what is the provider ID for BEV Thanks. Pansat 2500a. |
|
New member Username: Destine1983Montreal, Quebec Canada Post Number: 4 Registered: May-06 | I was just wondering if anyone got the new bin or the new keys for Pansat 2500a clone.I wasn't home today so I don't know when they went down.Left before 4pm and got home around 9:30 with no channels. |
|
New member Username: Destine1983Montreal, Quebec Canada Post Number: 5 Registered: May-06 | I was just wondering if anyone got the new bin or the new keys for Pansat 2500a clone.I was out today and when I got home the box was down.Please help |
|
New member Username: PomsidPost Number: 1 Registered: May-06 | Turn off auto roll and enter the keys manually BEV and Charlie is up 100% |
|
New member Username: Destine1983Montreal, Quebec Canada Post Number: 6 Registered: May-06 | but what keys do I enter?ANd where do I put them?Under Nigra 1 or Nigra 2?Please help |
|
Bronze Member Username: NalbouzPost Number: 11 Registered: Oct-05 | Yes, Go to parental lock at last row enter 0000 go to nagvision2 the Bev provider id is 09 01 Key 00 enter 98F744AC5E07D9ED for the first row and: 8AFF3B7E6571F94E for the 2nd go up to key 00 change it to 01 and goback down to first row and enter ACC2E13000A1C854 and 2nd row enter 0CB63162CA382FCB then do OK and exit,exit,exit ....watch bev 100% A: audio B: info c: sig D: pause E: sat F: Epg |
|
New member Username: RobdPost Number: 1 Registered: May-06 | I used these keys for BEV and all channels are back. 98 F7 44 AC 5E 07 D9 ED 8A FF 3B 7E 65 71 F9 4E d3 d1 3f 8b d3 80 95 1a f1 c4 99 49 c6 84 a3 3b |
|
Bronze Member Username: NalbouzPost Number: 12 Registered: Oct-05 | let me know if it's ok julie |
|
Bronze Member Username: PentigerPost Number: 21 Registered: Jun-05 | wowowowow let it roll it works!!!!!!!!!!! |
|
New member Username: Destine1983Montreal, Quebec Canada Post Number: 7 Registered: May-06 | but what keys do I enter?ANd where do I put them?Under Nigra 1 or Nigra 2?Please help.Also,how do I shut off autoroll?I went to turn off EMU,if this it? |
|
New member Username: PomsidPost Number: 3 Registered: May-06 | EMU is the autoroll See naser's post earlier to enter keys manually |
|
New member Username: Destine1983Montreal, Quebec Canada Post Number: 8 Registered: May-06 | OH MY GOD,THANK YOU SO MUCH naser.Me and my little girl thank you.If these change again,please let me know the new ones.Thanks again |
|
New member Username: Main420Post Number: 3 Registered: May-06 | hi, is this the key for bev 82 or 91? if it is for 82, please let me what slot number did u use for CS 5000 platinum(00, 00, 01, 01)? |
|
Bronze Member Username: NalbouzPost Number: 14 Registered: Oct-05 | my pleasure Julie.hope it will work for good long time, we worked hard for the last 2-3 days. |
|
New member Username: UltimatefreakerPost Number: 1 Registered: May-06 | thanks all for getting me back up .this is my first post here. a special thanks to maple leaf for posting key. i shut off key emu before entering key manually and when i exited still nothing so i turned emu back on it worked right away. so if your out there inputting keys and still nothing happens try turning emu back on when your done. |
|
New member Username: Operez4San German, Puerto Rico Post Number: 2 Registered: May-06 | Can some one give me the viewsat platinum keys, please |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 448 Registered: May-06 | Oscar: The keys is already posted above, check the date, 98 F7 44 AC 5E 07 D9 ED 8A FF 3B 7E 65 71 F9 4E d3 d1 3f 8b d3 80 95 1a f1 c4 99 49 c6 84 a3 3b Im already answer in your other post. |
|
Bronze Member Username: PentigerPost Number: 22 Registered: Jun-05 | let the autoroll do it's job no need to enter anything |
|
Bronze Member Username: AanaaPost Number: 44 Registered: Mar-05 | EVA:which is latest 98.... or d3.... pentiger :? autoroll is not doing its job what bin? 148or 270?pansat 2700 |
|
New member Username: Lgs500Nyc Post Number: 1 Registered: May-06 | guys i just entered the keys everything works great....question...How can I find out what bin I am using, I get some channels on ppv not all.....what bin version should I be using, how do i download a new one...pleas help me, once again thanks in advance... |
|
New member Username: MinmikePost Number: 8 Registered: Apr-06 | luis,did u enter the keys from eva diaz post and did u do anything with autoroll(on or off).thanks |
|
New member Username: Fryman22222222222, 2222222222222 222222222222 Post Number: 5 Registered: May-06 | hi good morning. i have tried everything. i input the new codes and have reloaded sat. i have tried the emu off and on. i am running a pansat 2700a with a 6.2 bin can anyone help. if i need a new bin can you please give some tips as i have not yet had to change it. |
|
Silver Member Username: The_wank_artistPost Number: 459 Registered: Feb-06 | aanaa, O= 98F744AC5E07D9ED O= 5E07D9ED6571F94E 1= 98F744AC5E07D9ED 1= 5E07D9ED6571F94E Active BEV keys 148 is not working. Not sure if 270 is or not either as I have not tested it. **** edited post at 9:43 *** |
|
Bronze Member Username: PentigerPost Number: 23 Registered: Jun-05 | auto roll did it's job on my 3500 and 2500, 10 minutes ago. |
|
Bronze Member Username: Micklee11801Post Number: 17 Registered: Feb-06 | I have pansat 2700a using 146 bin. I did a factory reset and then scan all the chanels again. All the chanels came back including the Vu and adult chanels, everthing. please try and watch t.v. |
|
Gold Member Username: LklivesPost Number: 2718 Registered: Jan-06 | Tyler....How do U have the ability to EDIT your post, 15 minutes later after original post? ONLY mods here have that ability to edit and delete posts! |
|
Silver Member Username: The_wank_artistPost Number: 465 Registered: Feb-06 | Top left hand corner of the page where it says edit profile. Go into that and log in, click on view last posts. It only lets you edit up to a certain time limit. You can also delet them. You give me too much credit, I am no mod. |
|
Silver Member Username: The_wank_artistPost Number: 466 Registered: Feb-06 | Oh, you may have to highlight the view post funtion before hand. So when you log in, scroll down a bit to 'Preferences', last option, 'Show list of my most recent posts when editing my profile'. |
|
Silver Member Username: The_wank_artistPost Number: 467 Registered: Feb-06 | Get it going LK? |
|
New member Username: CusaPuerto Rico United States Post Number: 1 Registered: May-06 | Hey, someone there? I'm new here. Please I need someones help. I've been reading all the above. Did all the steps now I have a Scramble or bad channel... could you please help! By the way I have a fortec star ultra |
|
New member Username: BurkanPost Number: 9 Registered: May-06 | WHAT DOES "BEV" stand for????? WILL SOMEONE PLEASE ANSWER. |
|
New member Username: BurkanPost Number: 10 Registered: May-06 | Also what satellites are associated with BEV, for example DN which is dish network is associated with Echostar Satellites, What is BEV then? Just want to know. |
|
New member Username: Js4fnPost Number: 3 Registered: May-06 | llVu hope that hint helps not suppose to be said outloud |
|
Bronze Member Username: BertoroToronto, Ontario Canada Post Number: 50 Registered: Apr-05 | bev...bell express view |
|
Bronze Member Username: Raging_fisherPost Number: 30 Registered: Feb-06 | Burkan, are you absolutely serious?? BEV??? Hmmmmmmmm Bell Expressvu?? If you live in the greatest Country in the world, you would know this..... |
|
New member Username: U2rockPost Number: 1 Registered: May-06 | I am somewhat familiar with FTA. I have viewsat Plat which is working with SuperDish 121. I am getting Echo Star (6,8),9 and 7. I am not familiar with Bev. Do they have same channels?. If I want to get Bev channels what do I need to do?. I do have extra dish which I can use. Is Bev part of Directv?. I usually get my info from different website. Any info would be helpful. thanks |
|
Bronze Member Username: BurkanPost Number: 11 Registered: May-06 | I live in the Greatest Country Califronia. I have never heard of Bell Expressvu before. Only DishNet and DirectTV |
|
New member Username: ChessyPost Number: 6 Registered: Jan-06 | burkan well sorry about your luck.... you are missing the best xxx channells on bell..... you would love vuns 4 ... |
|
Gold Member Username: LklivesPost Number: 2784 Registered: Jan-06 | Bev sucks compared to DTV or Dishnet! |
|
Bronze Member Username: BurkanPost Number: 12 Registered: May-06 | Chessy, Its not too late, what Satellites is BEV on? |
|
New member Username: Destine1983Montreal, Quebec Canada Post Number: 9 Registered: May-06 | Can someone please help me yet again?I put in the new keys Naser gave me last night but now the keys are rolling on PPVs and xxx.Does anyone know whats going on or if there is a new fix?thanks |
|
Bronze Member Username: Destine1983Montreal, Quebec Canada Post Number: 12 Registered: May-06 | I just tried to change the keys for 01 on nagra which changed to E6 6A 45 91 C0 C0 85 2F A7 91 19 D7 46 1A 3F 52 and they still didn't bring out my PPV channels.Please someone help me |
|
New member Username: ChessyPost Number: 8 Registered: Jan-06 | for me it is 91.0w nimiq1,3 dont go to venus4 it is g ay xxx but it does have 11 xxx channels |
|
New member Username: BiverlandPost Number: 6 Registered: May-06 | 00 98 F7 44 AC 5E 07 D9 ED 8A FF 3B 7E 65 71 F9 4E 01 AC C2 E1 3D 00 A1 C8 54 0C B6 31 62 CA 38 2F CB bev key... |
|
New member Username: YannissPost Number: 7 Registered: Feb-06 | again with the right keys nooooooooooooo ppv and no venus this afternoon i dont know what bev is trying all night and day was working but today now lost ppv and venus |
|
Bronze Member Username: Destine1983Montreal, Quebec Canada Post Number: 14 Registered: May-06 | 00 98 F7 44 AC 5E 07 D9 ED 8A FF 3B 7E 65 71 F9 4E 01 AC C2 E1 3D 00 A1 C8 54 0C B6 31 62 CA 38 2F CB bev key... Those are the original keys I entered in last night and got all the channels back.But now,the PPVs and xxx are gone from those keys.Are these keys working for everyone to get PPV or xxx?Am I the only one not getting PPV? |
|
Bronze Member Username: NalbouzPost Number: 15 Registered: Oct-05 | Julie, I'm away from home now , as soon as i get home i'll see and let you know, but try this for now, put the autoroll of and re-enter the keys and let me know |
|
Bronze Member Username: Destine1983Montreal, Quebec Canada Post Number: 16 Registered: May-06 | ok I will Naser,right now I am away from home also and will try it once I get home within the hour.Thanks again |
|
New member Username: TimberwolfscPost Number: 5 Registered: May-06 | PPV and XXX are down on B3V. no current fix yet |
|
Bronze Member Username: Punjavi_dooPost Number: 51 Registered: Sep-05 | cant understand how this Tyler dude find out how to edit posts (nobody ever done it before) Man ...... he a smart cookie  |
|
New member Username: GroneAnaheim, Ca Usa Post Number: 1 Registered: May-06 | I am new to this but thank you to all,for help me to fix my pansat 2700. |
|
New member Username: Unclebob9Post Number: 1 Registered: May-06 | BEV is Bell Expressview, Canadian based, uses Nimiq 1,2& 3 Satelites, They have similiar channel line-up to Echostar 6/8 & 7, with some additional PPV and sports and XXX. It sometimes works after Echostars have been hit. But BEV rolls a bit mor often and is generally down more. |
|
Bronze Member Username: BurkanPost Number: 14 Registered: May-06 | What xxx channels are usually on BEV? I lost some channels like Fantasy but I don't know if it was on BEV or on 110 Echo 7 which I lost. |
|
Bronze Member Username: VinidominePost Number: 22 Registered: May-06 | X rated channels on BEV are VENUS through VENUS10 and S e xTV. Vini. |
|
New member Username: U2rockPost Number: 2 Registered: May-06 | Thanks Bob, As I mentioned above in my post that I do have superdish 121 where I am getting most of my channels with Viewsat Plat. So I all have to do is download satinfo file which as Nimiq 1,2&3 and do a antenna setup?. I don't need to change my dish position or add another one?. Do you know what TP Freq and other info I need for setting up Nimiq?. I'll try to find form with Nimiq setup. Thanks |
|
Bronze Member Username: BurkanPost Number: 15 Registered: May-06 | Unclebob, so does that mean for those of us who get the Echostar 6/8 & 7 channels can also get Nimiq 1,2&3? if so what TP Freq is needed for Nimiq? I guess Bobby and I need the same info. |
|
Bronze Member Username: Destine1983Montreal, Quebec Canada Post Number: 17 Registered: May-06 | Naser,I tried but my ppvs and xxx are still gone.ANd little by little my stations are coming and going.I had to wait for the keys to roll for my daughter to watch treehouse today.Any idea on how to fix the ppvs or xxxs? |
|
Bronze Member Username: BurkanPost Number: 16 Registered: May-06 | Where can I go to on the net to lookup what channels a satellite transmitts? When I scan all channels for all satellites I get many repeats. For example, I get channel 246ABC-W 4 times one fore each of the following satellites: 119 Echo 110 Echo 148 Echo 61.5 Echo Same thing for the PPV and VOD, and XXX. |
|
Bronze Member Username: NalbouzPost Number: 17 Registered: Oct-05 | Julie, sorry i dont have yet a solution i'll wait . |
|
Bronze Member Username: Destine1983Montreal, Quebec Canada Post Number: 21 Registered: May-06 | NO prob naser,I will just keep checking in and if I find out anything,I will post it here. One thing though,I went to another site [link removed] and they gave me these codes for bev Bell ExpressVu (Last Update: 2006/05/24 12:30 CST) Key 0: 98 F7 44 AC 5E 07 D9 ED 8A FF 3B 7E 65 71 F9 4E Active Key 1: D3 D1 3F 8B D3 80 95 1A 71 9C 60 71 04 C1 39 AE is this a good one or should I stick to my old one u gave me? |
|
Bronze Member Username: NalbouzPost Number: 18 Registered: Oct-05 | it' good too, you can see the active one ,is the same that you have it before. |
|
New member Username: Ssparkle0316Post Number: 3 Registered: May-06 | thanks for the new bev keys |
|
Bronze Member Username: NalbouzPost Number: 20 Registered: Oct-05 | Julie, i just open my tv there were no bev, i did roll it, it came back with this keys: key 00 : the same in your post but now this is not the active one key 01:THE first line of keys correct but the second line changed to: F1 11 C4 99 49 C6 84 A3 3B I DID NOT CHECK YET THE PPV WITH THOSE NEW KEYS |
|
Bronze Member Username: NalbouzPost Number: 21 Registered: Oct-05 | NEW KEYS bev 98 F7 44 AC 5E 07 D9 ED 8A FF 3B 7E 65 71 F9 4E D3 D1 3F 8B D3 80 95 1A F1 C4 99 49 C6 84 A3 3B |
|
New member Username: NeurosisPost Number: 6 Registered: May-06 | why are there so many different keys, doesn't everyone use the same programs? |
|
Bronze Member Username: Destine1983Montreal, Quebec Canada Post Number: 31 Registered: May-06 | naser,these new keys,do they show ppv and xxx? |
|
Bronze Member Username: Destine1983Montreal, Quebec Canada Post Number: 32 Registered: May-06 | Naser,these codes you just gave,I have them in my pansat and the ppvs still aren't working.Just wanted to clarify that |
|
New member Username: Ssparkle0316Post Number: 4 Registered: May-06 | does anybody have the ppv and xxx working, please help. |
|
Silver Member Username: The_wank_artistPost Number: 496 Registered: Feb-06 | The PPV and XXX will not work. BEV is meessing around with them and blocking us from seeing them. Wait and see what the programmers of the bins can do, or wait until BEV unlocks them again. |
|
New member Username: Unclebob9Post Number: 2 Registered: May-06 | PPV and XXX are working on Echostar 7 & 8/10. Bev is down for now. |
|
New member Username: Unclebob9Post Number: 3 Registered: May-06 | YOu will need a seperate dish to pick up the BEV Nimiq Satelite. It is much lower elevation and about 80 degrees south of the direction you point for the Echostar's. |
|
Bronze Member Username: NalbouzPost Number: 22 Registered: Oct-05 | julie the keys i posted at 8:15 pm they do not show ppv's |
|
Bronze Member Username: Destine1983Montreal, Quebec Canada Post Number: 43 Registered: May-06 | I got the ppvs on dish network working so I got them for now at least.But for some reason I programmed another box for a friend with the new keys for dish and they don't work.Black screen.Do you know if they changed naser? |
|
Bronze Member Username: NalbouzPost Number: 23 Registered: Oct-05 | no change so far |
|
New member Username: Tvaddict17Post Number: 3 Registered: May-06 | Just to inform if you don't know already there are new bins out there now with autoroll repair for all recievers like bin 275 for pansat 2500 & X-87BL 271 for pansat 2700 & AA-1 276 bin for Ariza Extreme & 1.223 for the Orasat |
|
Gold Member Username: LklivesPost Number: 2837 Registered: Jan-06 | another notice here too...U can receive Nimiq (Bell) sats and Echo (dishnet) on the same dish in 99% of North America..! |
|
Bronze Member Username: Micklee11801Post Number: 27 Registered: Feb-06 | what do you mean, can receive Nimiq (Bell) sats and Echo (dishnet) on the same dish in 99% LK? |
|
New member Username: SchellingPost Number: 1 Registered: May-06 | I have a question. I used to get DN channels before but now I only get Bell channels. Maybe I changed something without realizing it. I like to get DN channels again. I did move around my satellite dish. Can that be the reason. Doed DN and Bell have different satellites. Thank you for your help. |
|
Bronze Member Username: Destine1983Montreal, Quebec Canada Post Number: 51 Registered: May-06 | yes dish network and bev have different satellites.Unless you have a dual lnb which is the part on the end of you dish,there would be two instead of one.You can find out if you still get dish by checking in you installation part of the menu and checking out the quality on your dish,whether its echo8,7 or whatever.And if you do have a signal,redownload the channels on taht and see if the names of the stations are the same as what you had under dish. |
|
New member Username: SchellingPost Number: 2 Registered: May-06 | Julie, I checked the quality of echo8.6/ku (119)and echo7 (110) . The quality seems good. I then did a blind scan for those satellites but I keep getting Bell (Canadian) channels. What is the name of the bell satellite. |
|
New member Username: Jun28Brooklyn Post Number: 1 Registered: May-06 | is there anybody who can help me. i'm new to this sattelite staff. anyway my bell( canadian channels ppv) are not working, when infact all of the other ones are working. furthermore all of my echo star channels stop working. i would gladly appreciate help from anybody so i can restore thos channels. i'm even offering a reward for any body who help me. so my email is fgmathurin@yahoo.com |
|
New member Username: Jun28Brooklyn Post Number: 2 Registered: May-06 | i forgot to mention that i have a pansat 2700a |
|
Bronze Member Username: Destine1983Montreal, Quebec Canada Post Number: 52 Registered: May-06 | the bev satellite is normally under nimiq 1. |
|
Bronze Member Username: Electro99Post Number: 21 Registered: Jan-06 | Hey junior!!! BEV is suck get DN !!! Instal two dishes one for DN and second for BEV if you realy want.Anyway get beter reciver , I have cools@t 5000 plat .No problem to get all DN channels and always have to play to get all BEV. |
|
Silver Member Username: SatboyOntario Post Number: 150 Registered: Jan-06 | all of bell and all of dn are working fine , were working again within days , and yes I am receiving Nimiq 1 and 2 and dn 6.8 and 7 all on the same dish . |
|
Bronze Member Username: Electro99Post Number: 26 Registered: Jan-06 | Johny you got the PPV and XXX ???????????????????????????????????????????????????????????????????????????????? ??????????????????????? |
|
Bronze Member Username: NalbouzPost Number: 24 Registered: Oct-05 | Johny, what size of dish do you have to receive sats from 91 to 119? |
|
Silver Member Username: The_wank_artistPost Number: 566 Registered: Feb-06 | If you use an elliptical dish, you can do it. I have a standard 33" one and it works, though I call it Frankendish. Not the prettiest one on the block, but I've grown rather attached to it. |
|
New member Username: BubblyPost Number: 3 Registered: May-06 | How do we install the new bin onto the Pansat 2700 receiver and what could happen to the receiver if the auto roll is left on the OFF mode? |
|
Bronze Member Username: Destine1983Montreal, Quebec Canada Post Number: 58 Registered: May-06 | I found a new bin for my pansat 2500a clone and I was just wondering if anyone had used it yet?I don't want to fry my box X-85bL_060526_275_db_api(N) |
|
Bronze Member Username: Electro99Post Number: 27 Registered: Jan-06 | Johny tell them you dont have PPV and XXX !!!!!!!!!! |
|
Bronze Member Username: NalbouzPost Number: 25 Registered: Oct-05 | Tyler , I have 36" standard one, can i receive sats from 91 to 119, if so where it should be pointed? thanks |
|
Silver Member Username: The_wank_artistPost Number: 567 Registered: Feb-06 | get 10 and 19 going, with 10 off the arm. You'll need an adaptor that allows you to have the 91 on the left side of 10 (looking at the dish) by about 2", and down about 1.5". Those are guesses, as I locked in 10/19 and then played with 91 until the signal came in. My hardware looks a little like this.  |
|
Bronze Member Username: NalbouzPost Number: 26 Registered: Oct-05 | Thanks Tyler i'll try it |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 501 Registered: May-06 | ExpressVu Current keys Idea Key 86 98 F7 44 AC 5E 07 D9 ED 8A FF 3B 7E 65 71 F9 4E Idea Key 96 Active D3 D1 3F 8B D3 80 95 1A F1 C4 99 49 C6 84 A3 3B |
|
Bronze Member Username: Destine1983Montreal, Quebec Canada Post Number: 66 Registered: May-06 | those are the keys I have right now on my bev,and no channels working.no ppvs,no xxx,and worst of all,no regular channels.is there new keys or is it just that the keys no longer work and we need a new bin?? |
|
Gold Member Username: LklivesPost Number: 2880 Registered: Jan-06 | Bell ExpressVu 29 May Key 86: Active: 63 04 DB C0 28 F5 01 E4 53 0E 17 5D EA 8A 13 6A Key 96: D3 D1 3F 8B D3 80 95 1A F1 C4 99 49 C6 84 A3 3B |
|
Bronze Member Username: NalbouzPost Number: 29 Registered: Oct-05 | Thanks LK it's working |
|
New member Username: Ds_edmPost Number: 2 Registered: May-06 | thanks LK though no PPV |
|
New member Username: DaldoulaMontreal, Quebec Canada Post Number: 1 Registered: May-06 | Hi LK What type of receiver and bin did these keys work with? Pansat clone 2500 A with bin 274 with auto roll and keys inserted manually, did not work even when waiting for picture reached 6400 %. |
|
Silver Member Username: The_wank_artistPost Number: 587 Registered: Feb-06 | If that one's not working for you then try the 275T bin which works with Pansat 2500 clones. Find it at dsscentral*net under either the pansat or fortec area. |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 522 Registered: May-06 | Do you need change again the keys. |
|
New member Username: LostlakeElk Lake, ON Canada Post Number: 1 Registered: May-06 | C***sat 5000 platinum. no channels, entered new keys, turned off auto scroll, did auto channel scan and saved, still nothing. What is 'bin' God, it's tough to be the new guy! Any help is much appreciated and thanks. Ed |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 528 Registered: May-06 | Ed try stop autoroll and enter the new keys again. |
|
Silver Member Username: The_wank_artistPost Number: 594 Registered: Feb-06 | Ed, A bin is either an abbreviated name for a application or program you load to your receiver that enters the keys for you, even as they change. Or it's derived from Old English vocabulary, probably of Celtic origin, meaning a container or enclosed space for storage. Let's go with the computer program though shall we?? Go to dss central.net and get the 121 bin from there. They also have the loader for the cools@'s. And the 121 is found in the cools@ 5k platinum area under the cools@ area. Best of luck! |
|
New member Username: KaedynnPost Number: 1 Registered: May-06 | does anyone have new keys foe fortec classic please help |
|
New member Username: BluebirdsfanPost Number: 2 Registered: May-06 | Hey all, I just finished uploading the new bin (275T) and manually entered the keys provided by LK...yet I still get "Wait for Picture...". I already rebooted (from the back) PS: I can see the title of the show...but not pic or sound. Could guys help me out? Really appreciated. |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 530 Registered: May-06 | kaedynn are you kidding? The keys are the same for all receivers, if you want the BEV latest keys read above.  |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 531 Registered: May-06 | David: Try scanning all satellite. |
|
Silver Member Username: The_wank_artistPost Number: 596 Registered: Feb-06 | Kaedynn, the keys are the same for all receivers, whether they are fortec, pansat, cools@, clone, or whatever. Check LK's post just above dated: Monday, May 29, 2006 - 06:07 pm: and these ones for DN: N 0101 00: E8 70 B0 0A 8E 0A 3D C5 F3 59 C3 5F 1A DA 19 5C N 0101 01: (active) 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC |
|
New member Username: LostlakeElk Lake, ON Canada Post Number: 2 Registered: May-06 | Thank you very much Tyler Durden, I like the sounds of the Celtic version but most likely the 'Hot" new computer adaptation will work better. Thanks again, I'll give it a spin. Eva Diaz and I might be related, we have the same initials? Eva, you're probably not Scotish from Puerto Rico are you? Heck, ya just never know? Ed |
|
New member Username: KaedynnPost Number: 2 Registered: May-06 | ive tried those but im getting on my screen code being updated please wait |
|
New member Username: LostlakeElk Lake, ON Canada Post Number: 3 Registered: May-06 | Eva, thank you for your help, I think I did that but I'll double check. Much appreciated and are we related? Ed |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 533 Registered: May-06 | Do you need stop autoroll and enter the keys again. If still you did not see any channel try turn autoroll again on. |
|
New member Username: BluebirdsfanPost Number: 3 Registered: May-06 | Thanks for the prompt reply Tyler. Just so I'm sure... Autoroll should be set to OFF except for "Keycode" correct? |
|
Silver Member Username: The_wank_artistPost Number: 599 Registered: Feb-06 | No, I think you can use auto roll on the 121 but I'm not 100% sure. I don't have the cools@ but I think the 121 is running on auto roll now. Checked a thread here titled "Cools@t 5000 Platinum?" and once you get past some of the bullshit bickering between some members, Ron states he's using the 121 and working like a charm. Go to dsscentral*net and you'll find it there in the Cools@ area. (replace the * with . ) Best of luck. |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 536 Registered: May-06 | David: Do you need stop autoroll for stop changing keys. IF you want enter manually keys stop autoroll. |
|
Silver Member Username: The_wank_artistPost Number: 600 Registered: Feb-06 | David, Sorry, I thought you were Ed from the above post!! LOL. Yes, turn off auto roll and then keycode should be on. That should do it for you I believe. |
|
Silver Member Username: The_wank_artistPost Number: 601 Registered: Feb-06 | Kaedynn, if you're still here. You have auto roll on which is why when you manually enter the keys you're still waiting for picture. You should turn it off and then enter the keys. |
|
New member Username: BluebirdsfanPost Number: 4 Registered: May-06 | lol... TD...I tried what you told me...but I'm still unable to get anything going. -Got the latest Bin -Set all settings to "OFF" under the "Autoroll Option" window....only left "Keycode" to "ON". -Entered the keys below under (09 01 01) 63 04 DB C0 28 F5 01 E4 53 0E 17 5D EA 8A 13 6A (09 01 00) D3 D1 3F 8B D3 80 95 1A F1 C4 99 49 C6 84 A3 3B -Still unable to get it working (BTW I have a Pansat 2500) I hope you have all the info you need -Thanks for the help in advance |
|
Bronze Member Username: MillaEdmonton, Alberta Canada Post Number: 20 Registered: May-06 | can anyone tell me if bin 275 will work better than 273t that i currently use. i am new to this. |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 541 Registered: May-06 | David try turn off all in autoroll enter the keys and turn autoroll on again. |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 543 Registered: May-06 | abu: This thread is about BEV, please go to the thread about your receiver. Blacklist does it again! Here are the newest bins for Pansat receivers! You must be a member of We owe a big thanks to Blacklist and Blacklist2 for all of their hard work. geniusjc2 Pansat 2300 Pansat 2500 Pansat 2700A/E Pansat 3500S/SD Pansat 5000Hc Pansat 6000HXc https://www.ecoustics.com/electronics/forum/home-video/228421.html |
|
New member Username: BluebirdsfanPost Number: 5 Registered: May-06 | Thanks Eva...I'll give it a try. |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 544 Registered: May-06 | DAvid: Try restore factory settings, and set date and keys again, select the satellite and scan all satellite. Blind scan in vertical only. |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 545 Registered: May-06 | David lucky and let me know. |
|
New member Username: Main420Post Number: 10 Registered: May-06 | great LK!!!! thanks for the keys |
|
New member Username: SchellingPost Number: 3 Registered: May-06 | I know how to enter keys for DN. But can someone tell me how to enter keys for Bell. Do I still have to go to Nagra 2. Thank you. |
|
New member Username: SushiPost Number: 1 Registered: May-06 | Hi Naser, I read your instruction to input BEV keys. Is this for Ariza 700? I have dishnet working on N2. So, if I enter the Bev key like you say then I will be able to get dish and BEV on existing 2 dish system I have? |
|
Bronze Member Username: KjniceguyLethbridge, Alberta Canada Post Number: 27 Registered: May-06 | Can someone tell me how many channels they have gotten for Nimiq 1? i only have 184 registered , but no cnn or Space or TBS...is that because it is on Nimiq 2? |
|
Bronze Member Username: Destine1983Montreal, Quebec Canada Post Number: 68 Registered: May-06 | I got those channels on nimiq 1.I got around 380 I think |
|
Silver Member Username: WoofyOntario Canada Post Number: 165 Registered: Feb-06 | No..those channels are on nimiq 1..try a new scan. |
|
Bronze Member Username: KjniceguyLethbridge, Alberta Canada Post Number: 28 Registered: May-06 | i finally set up my new dish to point to BEV but i can only get 75 % signal and 70 % quality...hopefully when i get home tonight i can adjust it better...and i'll try scanning again |
|
Silver Member Username: WoofyOntario Canada Post Number: 166 Registered: Feb-06 | That should do the trick. good luck |
|
New member Username: Gibbs912Savannah, Ga Chatham Post Number: 5 Registered: May-06 | I HAVE A FORTEC STAR NA AND SOMEBODY TOLD ME TO TO CLEAR ALL CHANNELS AND FACTORY RESET I AM USEING THE LIBRARY COMPUTER WHAT CAN I DO TO FIX THIS I HAVE SOME CHANNELS BUT I LOST ALOT EVEN MY LOCALS HOW CAN I FIX THIS MANUALLY |
|
New member Username: Gibbs912Savannah, Ga Chatham Post Number: 6 Registered: May-06 | ONE MORE QUESTION WHAT DO I NEED TO GET BEV |
|
New member Username: Toto132Post Number: 5 Registered: Mar-06 | hi everyone i have a cooltec 4000 with this information on it cas--------------nagravision ident------------expressvu(0801) 10--------63 04 db c0 28 f5 01 e4 11--------53 0e 17 5d ea 8a 13 6a 20--------d3 d1 3f 8b d3 80 95 1a 21--------f1 c4 99 49 c6 84 a3 3b bev not working can any one tel me what's worng thank u |
|
New member Username: Miguel03Tucson Post Number: 4 Registered: May-06 | Hey toto, make sure this information is in Nag 2 and look to see if your Sat settings are right and that you have a strong signal. You might want to get the current bin installed if you haven't 1.21. |
|
New member Username: Toto132Post Number: 6 Registered: Mar-06 | thank you Miguel it worked..... |
|
New member Username: NynydrePost Number: 2 Registered: May-06 | need help with this thing. pansat 2500a. did factory resest and rescaned sat. and still nothing. |
|
Silver Member Username: The_wank_artistPost Number: 636 Registered: Feb-06 | Did you put in the latest bin which you can get at dsscentral*net? Give it a try. Otherwise we have no idea what you're typing about. |
|
Bronze Member Username: KjniceguyLethbridge, Alberta Canada Post Number: 29 Registered: May-06 | Well i tried a new scan ..deleted old Channels...and still i only got about 130 channels.. and most of them are European and Asian. only a few were canadian but not the Ones im trying to get..ie Space.. TBS.. and a few Superstations... ive tried adjusting my dish but still only get 75 % signal and 70 % Quality...is my next step to completely Move my Dish to a new Location?? |
|
Bronze Member Username: Yarda_666Post Number: 15 Registered: May-06 | ok, theres a soccer match on TV5MONDE, but i cant find the channel on my pansat. anybody knows if it has another name, or what to do other than rescanning. |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 565 Registered: May-06 | yarda: YOU CANT post the same question in different thread. REad the rules. |
|
Bronze Member Username: Yarda_666Post Number: 16 Registered: May-06 | rules????? jajajajaja |
|
New member Username: DarioPost Number: 3 Registered: May-06 | Eva, MUCHAS GRACIAS por tu colaboracion y la pasiencia que tienes con todos.......Hice lo que me dijiste y esta funcionando perfectamente, miles y miles de gracias |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 573 Registered: May-06 | dario you welcome. |
|
New member Username: BluebirdsfanPost Number: 6 Registered: May-06 | Eva, I just wanted to say thanks (for yesterday). Your instructions helped fix the issue. |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 575 Registered: May-06 | David, you welcome. |
|
New member Username: Mike88Post Number: 1 Registered: May-06 | just was wondering if someone can confirm that the bev ppv's r down>>or is it just me?? |
|
Gold Member Username: LklivesPost Number: 2896 Registered: Jan-06 | its just U...NOT READING these forums! |
|
New member Username: Mike88Post Number: 2 Registered: May-06 | cmon man i did read the threads!!! since the last key i wasn't sure if everyones ppv's were down or not. |
|
Bronze Member Username: Raging_fisherPost Number: 33 Registered: Feb-06 | By the looks of all the posts PPV's and VENUS are down on B3V. |
|
New member Username: Mike88Post Number: 3 Registered: May-06 | i thought so>> but thanks for confirming!! |
|
New member Username: DaldoulaMontreal, Quebec Canada Post Number: 2 Registered: May-06 | Reference :Post Number: 543 concerning the pansat bins from BlackLIST Please be advised that the 2500 bin will damage the clones. I installed on aPansat/Fortec clone .It worked for about 5 minutes and the system went blank. The unit powers on, but no night rider and no boot. Will JTAG help ???? |
|
Gold Member Username: LklivesPost Number: 2956 Registered: Jan-06 | It's COMMON knowledge that U cannot use BL genuine receiver bins on any clones!...thats why use use the 273T...274T or 275T clone safe 2500 bins...there are no safe bins for clones of the 2700 or 3500, but I know many people here are using 2700 clones (Tyler) and have been luck enough not to get corrupted!...and others all need Jtag...there is a great 2700 clone THREAD with pics at future-fta.info...shows and explains the diffrences between 2700 clones and genuine...but thread is too long to post here.. |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics