Poormans dish setup - 22khz ON or OFF???

Ilchy Baby New member Username: Dailce Post Number: 10 Registered: May-06	Posted on Friday, May 26, 2006 - 22:10 GMT Hi I've been trying to find information on this. I'm only trying to get 110 and 119. I can point my 18" DTV Dish at 110 and I get 97% strength top and bottom. When I try to add the 119 to it I only get 12% I have a 4x1 Disq switch. I think I have them put in wrong??? What should 119 and 110 be in on my Disq switch? Should 110 be in the 1st lnb slot of the switch or second? I think I had 110 in slot 1 and 119 in slot 2. Also, do I need to turn 22khz ON or OFF? Thanks.
Alan New member Username: Califirnia Post Number: 2 Registered: Apr-06	Posted on Friday, May 26, 2006 - 22:14 GMT For me, I put 110 on port 1 and 119 on port 2. and both 22 khz to OFF. I get 90% S 92% Q Good luck
LK Gold Member Username: Lklives Post Number: 2794 Registered: Jan-06	Posted on Saturday, May 27, 2006 - 01:46 GMT Doesn't matter which port on switch, as long as the receiver settings are the same as actual port settings! BTW...U don't have the 119 LNB aimed correctly!
Ilchy Baby Bronze Member Username: Dailce Post Number: 11 Registered: May-06	Posted on Saturday, May 27, 2006 - 03:18 GMT How should the 119LNB aimed? I have a bracket/mount for the 110&119. 110 points straight 97%, and 119 is to the left of 110 (looking from behind the dish) - 119 is about 1 inch above 110 and tilted back about an inch, Is that right?
LK Gold Member Username: Lklives Post Number: 2809 Registered: Jan-06	Posted on Saturday, May 27, 2006 - 03:22 GMT sounds close...but it will vary depending upon where U live...use the sat finders files at dsstester.c*om
Ilchy Baby Bronze Member Username: Dailce Post Number: 12 Registered: May-06	Posted on Saturday, May 27, 2006 - 03:24 GMT Thanks LK you are the best. I will let you know how things go tommorow. I am in Ontario Canada.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us