I got my calculations need someone to check them

Zepcoe Silver Member Username: Zepcoe TN Us Post Number: 301 Registered: Apr-06	Posted on Tuesday, May 16, 2006 - 19:43 GMT Here are my cal. http://www.the12volt.com/caraudio/boxcalcs.asp#rec for this box the ports are 4 x 6 so im quessing the diameter of the port is 6 but not reall sure need some one to check it. let me know if its strait?
Zepcoe Silver Member Username: Zepcoe TN Us Post Number: 302 Registered: Apr-06	Posted on Tuesday, May 16, 2006 - 19:53 GMT sh!t link didnt work. heres what i put Port Diameter (D)-6 inches Box Volume (VB)-6.69596 cubic feet Tuning Frequency (Fb)-32 = Port Length-6.7239700000000004 inches How i got that was: Width of box- 44 Height of box- 18 Depth of box- 18 Thickness of box- 3/4 = Interior Volume-6.69596 cubic feet
Shaine Silver Member Username: Lexuscoop Pheonix, Arizona USA Post Number: 183 Registered: May-06	Posted on Tuesday, May 16, 2006 - 19:54 GMT whats the box going to be tuned to?
Zepcoe Silver Member Username: Zepcoe TN Us Post Number: 303 Registered: Apr-06	Posted on Tuesday, May 16, 2006 - 19:57 GMT 32
Shaine Silver Member Username: Lexuscoop Pheonix, Arizona USA Post Number: 184 Registered: May-06	Posted on Tuesday, May 16, 2006 - 19:59 GMT is it 1 box or are they seperated? if so did you calculate the 3/4 mdf in the middle?
Zepcoe Silver Member Username: Zepcoe TN Us Post Number: 304 Registered: Apr-06	Posted on Tuesday, May 16, 2006 - 20:10 GMT its going to be made out of high quality plywood and its 1 box
Shaine Silver Member Username: Lexuscoop Pheonix, Arizona USA Post Number: 185 Registered: May-06	Posted on Tuesday, May 16, 2006 - 20:14 GMT ok so the ports will be 12" by 4"... aren't ports usually longer than that?
drivingreckless Silver Member Username: Drivingreckless Near tampa, Florida United state... Post Number: 394 Registered: Apr-06	Posted on Tuesday, May 16, 2006 - 20:23 GMT wuts going in them???
Zepcoe Silver Member Username: Zepcoe TN Us Post Number: 308 Registered: Apr-06	Posted on Wednesday, May 17, 2006 - 02:01 GMT dude i dont know i got an explorer sport putting (2) 12's in it i want a box desighned like the one i showed you at the first post i just need demensions if i can get demensions and port lengths i can make the box
Zepcoe Silver Member Username: Zepcoe TN Us Post Number: 309 Registered: Apr-06	Posted on Wednesday, May 17, 2006 - 02:01 GMT (2) 12" ssi's
drivingreckless Silver Member Username: Drivingreckless Near tampa, Florida United state... Post Number: 407 Registered: Apr-06	Posted on Wednesday, May 17, 2006 - 02:08 GMT Number of drivers : 1 Box type : Vented Box size : 2.250 ft^3 Tuning frequency : 32.00 Hz Vent : 1 vent(s) 27.22 in length for each 2.00 x 14.50 in rectangle Internal Volume : 16.00" x 9.50" x 25.50" Relative Freq Gain SPL [Hz] [dB] [dB] 20.00 -13.88 106.07 25.00 -5.93 114.02 30.00 -0.27 119.68 35.00 2.46 122.41 40.00 2.97 122.93 45.00 2.72 122.67 50.00 2.33 122.29 55.00 1.98 121.94 60.00 1.69 121.65 65.00 1.46 121.41 70.00 1.26 121.22 75.00 1.11 121.06 80.00 0.98 120.93 85.00 0.87 120.82 90.00 0.78 120.73 95.00 0.70 120.65 100.00 0.63 120.58
drivingreckless Silver Member Username: Drivingreckless Near tampa, Florida United state... Post Number: 408 Registered: Apr-06	Posted on Wednesday, May 17, 2006 - 02:08 GMT i tuned it to 32 hz and its 2.25 cuft in volume
Zepcoe Silver Member Username: Zepcoe TN Us Post Number: 310 Registered: Apr-06	Posted on Wednesday, May 17, 2006 - 02:10 GMT is it a ssi 12
Zepcoe Silver Member Username: Zepcoe TN Us Post Number: 312 Registered: Apr-06	Posted on Wednesday, May 17, 2006 - 02:14 GMT 27.22 port length?
drivingreckless Silver Member Username: Drivingreckless Near tampa, Florida United state... Post Number: 409 Registered: Apr-06	Posted on Wednesday, May 17, 2006 - 02:35 GMT yess

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us