|
New member Username: SekatorPost Number: 10 Registered: Feb-06 | Ok, I must be missing something simple here: I enter the new codes for DN for my new Pansat 3500...everything works perfectly (I did the Blind Scan, have all the channels). But after about 30-60 seconds of viewing all the channels show up as scrambled again. I go to see the Nagravision 2 codes and they're changed on their own to something different than what I entered just a minute earlier...what the hell? thanks for clearing this up for me... |
|
New member Username: VapocPost Number: 3 Registered: May-06 | Hello! I just entered into this Forum, I have a Pansat 3500S, and I would like to know if the keys for 2500S equipment will work for 3500S equipment. Also I wwant to download the autoroll bin for the 3500S, please advise what is the Web Page where I can find it. Thank's ahead! |
|
Bronze Member Username: JohnnerPost Number: 67 Registered: Nov-05 | Tony>>> Your answer is where you first asked: |
|
New member Username: Herm_the_shermPost Number: 3 Registered: Apr-06 | johnner i have the same problem but i have a viewsat what should i do? |
|
Bronze Member Username: JohnnerPost Number: 73 Registered: Nov-05 | look for the pansat 2500a file this one is safe on clones too http://www.clickspin.com/FTA_Down/X-85BL_060318_273_au_api(N).bin |
|
New member Username: Herm_the_shermPost Number: 4 Registered: Apr-06 | johnner can i use that file on a viewsat 2000 platinum, it works fine on all channels except on the fight channel 455 and 456. |
|
Bronze Member Username: JohnnerPost Number: 76 Registered: Nov-05 | Go and delete the channel on channel edit Menu then Go to Menu.... Installation..... Advance Scan and look for the TP 11797 (H) and rescan it. |
|
New member Username: Sm92325Tracy, CA USA Post Number: 4 Registered: May-06 | I am having the same problem sekator |
|
Gold Member Username: LklivesPost Number: 2425 Registered: Jan-06 | If keys do NOT SAVE, which U should be doing...set default key...EMU ON...or rename the DN satellites....or go back an use NON autoroll bin....or many receiver have a way to disable the autoroll or simply turn it off (especially viewsat and c*oolsat)..read your manuals for your receivers...all DSS sites,evcept here have them! |
|
New member Username: Sm92325Tracy, CA USA Post Number: 5 Registered: May-06 | LK, I do not have a manual. I renamed the sat. and still have the same problem. Do you know how to disable the autoroll on panset 2500a? Any help would be greatly appreciated. |
|
Bronze Member Username: SekatorPost Number: 11 Registered: Feb-06 | Yeah, I renamed my sats too, but to no avail. Still does not work...I was not able to find a 144T on that site, there is a 145, I presume I have to take that BIN file and upgrade my Pansat via a null-modem serial cable using the Blacklist Updater, correct? Never done that before, but just from my research it seems to be what I have to do...pls verify, thanks |
|
Silver Member Username: The_wank_artistPost Number: 167 Registered: Feb-06 | Sekator, https://www.ecoustics.com/electronics/forum/home-video/221275.html Read this thread. You'll be tested on it afterwards. |
|
New member Username: Sm92325Tracy, CA USA Post Number: 6 Registered: May-06 | Just checking to see if anyone had new news for this problem. |
|
Silver Member Username: The_wank_artistPost Number: 200 Registered: Feb-06 | Jim, are you using a Pansat3500? And do you have the correct bin installed? Use the link just above your post. You'll have to install the new bin, 145. |
|
Bronze Member Username: SekatorPost Number: 12 Registered: Feb-06 | Guys, I upgraded to bin 145 (was my first bin upgrade, so I am glad it went well). Put in new codes, all 100% good. thanks for all your help! much appreciated |
|
Silver Member Username: The_wank_artistPost Number: 227 Registered: Feb-06 | Glad it worked for you Sekator. Now go watch tv. |