Hmmmmmmmm......confusion is insufferable

drivingreckless New member Username: Drivingreckless Nuthingsville, Florida United state... Post Number: 2 Registered: Apr-06	Posted on Tuesday, April 04, 2006 - 00:13 GMT how to wire a audiobahn a6004v and two p212s4???
lucas beckner Silver Member Username: Lbeckner Tulsa, Ok Usa Post Number: 892 Registered: Oct-04	Posted on Tuesday, April 04, 2006 - 02:15 GMT that amp is a 4 channel so you will need to bridge it. bridge the amp down to 2 channel and wire a woofer into each channel
drivingreckless Bronze Member Username: Drivingreckless Nuthingsville, Florida United state... Post Number: 17 Registered: Apr-06	Posted on Tuesday, April 04, 2006 - 02:30 GMT yes but the dilemma is how should i bridge it to 2 ohms or four ohms and also is overpowering subs dangerous?
lucas beckner Silver Member Username: Lbeckner Tulsa, Ok Usa Post Number: 896 Registered: Oct-04	Posted on Tuesday, April 04, 2006 - 04:23 GMT on the speaker outputs on your amp the bridged mode terminals should be marked. there may also be a switch to change it into bridged mode(2 channel). i dont think that u have to worry about over powering those subs with that amp.
Mick Bronze Member Username: Makmillion United States Post Number: 12 Registered: Apr-06	Posted on Wednesday, April 05, 2006 - 05:47 GMT Your only going to get a little over 430 watts out of that amp.. they won't blow using that amp, if you set it up correctly. Wire it at 4 ohms, it's not stable to 2 in bridged mode.
ty mutlow Gold Member Username: Tjmutlow Post Number: 1860 Registered: Sep-05	Posted on Wednesday, April 05, 2006 - 10:15 GMT you can not wire a single 4ohm sub to 2ohms
Mick Bronze Member Username: Makmillion United States Post Number: 20 Registered: Apr-06	Posted on Wednesday, April 05, 2006 - 12:22 GMT "how to wire a audiobahn a6004v and two p212s4???" I believe the post says (2) two P212S34 subwoofers.
johnny lemoine Silver Member Username: Johnnylemoine LaPlace, Louisiana United States Post Number: 683 Registered: Aug-04	Posted on Wednesday, April 05, 2006 - 15:20 GMT 2 single 4 ohm subs can be wired to 2 ohms. parallel.
Optidriven Silver Member Username: N2audio Lawrence, Ks USA Post Number: 784 Registered: Mar-04	Posted on Wednesday, April 05, 2006 - 15:25 GMT one sub per bridged channel - that's all there is to it
johnny lemoine Silver Member Username: Johnnylemoine LaPlace, Louisiana United States Post Number: 685 Registered: Aug-04	Posted on Wednesday, April 05, 2006 - 15:28 GMT oh sh*t, yeah optidriven, ur right, i didnt realize he was trying to use a 4 channel amp. yeah just do wut opti said, one sub per bridged channel.
lucas beckner Silver Member Username: Lbeckner Tulsa, Ok Usa Post Number: 915 Registered: Oct-04	Posted on Wednesday, April 05, 2006 - 18:21 GMT that amp is a 4 channel so you will need to bridge it. bridge the amp down to 2 channel and wire a woofer into each channel
drivingreckless Bronze Member Username: Drivingreckless Nuthingsville, Florida United state... Post Number: 18 Registered: Apr-06	Posted on Thursday, April 06, 2006 - 18:39 GMT THANK YOU FOR UR HELP IM GUNNA TRY ALL THE WAYS AND SEE WHICH ONE SOUNDS BEST....ALSO AUDIOBAHN SUX SO WUT AMP WOULD BE BETTER TOP PUSH THOSE TWO P212S4'S PLZ I NEED UR HELP JL/ROCKFORD/PG HELP???
lucas beckner Silver Member Username: Lbeckner Tulsa, Ok Usa Post Number: 925 Registered: Oct-04	Posted on Thursday, April 06, 2006 - 21:27 GMT You need a two ohm stable amp. plenty of good name brands on woofersetc.com and ebay

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us