|
Bronze Member Username: ChevelleLancaster, Pa Usa Post Number: 39 Registered: Feb-05 | Question i got a kicker L5 900w now it pops at high volume any ideas guess thats why it was so cheap. |
|
Silver Member Username: GoatinU.S.A Post Number: 172 Registered: Jan-06 | what size is it and your amp? |
|
Bronze Member Username: ChevelleLancaster, Pa Usa Post Number: 44 Registered: Feb-05 | kx550.2 |
|
Silver Member Username: GoatinU.S.A Post Number: 173 Registered: Jan-06 | is your sub 2 or 4 ohm |
|
Bronze Member Username: ChevelleLancaster, Pa Usa Post Number: 45 Registered: Feb-05 | that i'm going to have to take out the sub to see how it's wired i got it use but it's not all that old |
|
Silver Member Username: GoatinU.S.A Post Number: 176 Registered: Jan-06 | if your sub is 2 ohm bridge your amp and wire your subs like diagram 2 in the one that says 4ohm http://www.rockfordfosgate.com/rftech/wiringwizard.asp?WoofQty=1+woofer&WoofImp= Dual+Voice+Coil+-+2+ohms+x+2 |
|
Bronze Member Username: ChevelleLancaster, Pa Usa Post Number: 46 Registered: Feb-05 | well it's wired in 2ohm and i had it hooked up stereo but my other sub didn't do this.That will give me a 8ohm load and cut the power down |
|
Silver Member Username: GoatinU.S.A Post Number: 177 Registered: Jan-06 | if you bridge your amp it will be in 4 ohm so if your sub is 2 ohm you will have to wire it for 4 ohm impedance on the amp. |
|
Gold Member Username: TjmutlowPost Number: 1359 Registered: Sep-05 | Just one sub, wire it series to get 4ohm load, then bridge amp, if it still makes popping/rattling sound, the sub may be on its way out. |