|
va_blue_stang Unregistered guest | I am new to fta receivers, yesterday I flashed with a bin that would get bev but instead it killed the power to the receiver. I used jkey to jtag it but now the only thing it does when the switch is cut on is display 8.8.8.8 on the front display. Please help I have tried since yesterday with no luck. Also I tried wall and it cam up with an error that read "Warning the id code is incorrect". Is they're any hope for it. |
|
Grimreeper Unregistered guest | try loading the factory bin now |
|
va_blue_stang Unregistered guest | Do I load it with the uploader through the serial cable or with jtag cable. I have tried uploader and it will not communicate. What is the best uploader to try? Thank You For Your Help |
|
Pepe Smith Unregistered guest | try BL uploader and load 267 bin or 270 bin of Pansat2500a and use *last* button of your remote for number 0 (zero). |
|
Bronze Member Username: LklivesPost Number: 94 Registered: Jan-06 | Do NOT use either of those bins on a Ultra..U will kill it!....go read the 100 files posted on how to Jtag that Ultra correctly...then put the factory bin on it once U get the nite rider lights...then put either the 256T clone safe pansat 2500 bin...or the latest 282T Ultra bin.. dsscommunity has a file called "Nagra2 Black Death Repair kit.zip" that will fix it...I think its in the Fortec area of forums..look around or do a SEARCH there.. |
|
Bronze Member Username: LklivesPost Number: 95 Registered: Jan-06 | Here's the Ultra factory flash: [link removed] here's the repair kit and some more info about the 8888888: [link removed]&highlight=black+death |
|
Pepe Smith Unregistered guest | Lk,why until now my fortec ultra is running .Do I have a mistake for putting that 267 bin of Pansat2500a?? |
|
va_blue_stang Unregistered guest | If the ird chip is fried will the 8.8.8.8 display still come on. Thanks for all the help |
|
Bronze Member Username: LklivesPost Number: 98 Registered: Jan-06 | The 8888 is a nagra1 form of nite rider lights..just read the link, above I gave U, about the 8888...thats why I gave it to U!..The repair kit will fix it.. |
|
va_blue_stang Unregistered guest | I still can't get any program to connect through the jtag cable or serial cable. neither one is seen on two different receivers. both are flu |
|
Silver Member Username: LklivesPost Number: 110 Registered: Jan-06 | Then U are NOT following the instructions! |
|
New member Username: Newbie20Post Number: 9 Registered: Jan-06 | That will teach ya! DON'T USE BL's file/bin. |
|
New member Username: Newbie20Post Number: 10 Registered: Jan-06 | Some people never learn. |
|
va_blue_stang Unregistered guest | Is there any way to test the jtag cable to make sure it is correct? |
|
New member Username: Fire_foxTEXUSA Post Number: 1 Registered: Jan-06 | Iv'e got a lifetime ultra, does anyone know how i can get autoroll and bell express vu! |
|
New member Username: Fire_foxTEXUSA Post Number: 2 Registered: Jan-06 | I went to dsstester.c*om and found a bin file for autoroll. I would like to know if anyone used this file on their receiver. (Fortec Lifetime Ultra) Full autoroll for DN & BEV manual keys entry comfirmed working-5+days converted pansat 2300 bin with fortec remote codes added and clone kill removed. (x-75bl-051222-247e-ir-api. use at own rick. If you are using this file can you tell me if it works good or did it burn your receiver. Thank You |
|
Silver Member Username: LklivesPost Number: 118 Registered: Jan-06 | If U had read here, obviously this file can cause problems.. https://www.ecoustics.com/electronics/forum/home-video/189789.html |
|
va_blue_stang Unregistered guest | I took an ohm meter to check the connections. I noticed that all the pins for the jtag connection on the board are all reading that they are connected to each other and with the groung pins. I checked all of the solder joints under the main board and on top nothing is touching. Could this be the sign of a fried chip or something more simple that someone else has ran across and knows a solution. Also the .8.8.8.8 display still show but no menus or anything on the screen and the power button on the front isn't working to power it down. |
|
Silver Member Username: LklivesPost Number: 121 Registered: Jan-06 | AGAIN...U need to use then Nagra2 Black Death repair kit.zip file at dsscommunity..and ask for help there |
|
va_blue_stang Unregistered guest | I have checked all connections with a meter for continuity, the cable looks good but I noticed that all the jtag pins on the motherboard are showing that they are hooked together with the jtag cable unhooked and I noticed they are tied in withthe ground pins also. I have checked the solder work under the board and they are not touching each other. Any suggestions on what to check now. Thanks for all the help. Also I was able to get jkeys to communicate one time the first night but after that nothing. |
|
Z-Diddy Unregistered guest | I have the same 8.8.8.8. problem with Fortec Ultra due to a file I uploaded. How can I fix this? The links provided above http://dsscommunity*com/forums/viewtopic.php?t=6464 are disabled and the site has been moved...DssCentral*net - DssCommunity*com !! Error 404 !! The page you are trying to reach is temporarily unavailable or no longer exists. Please advise if there is another site? Thanks! |
|
Grimreeper Unregistered guest | http://www. cyberman2ya.com/forum/index.php?showtopic=251 try this |
|
coldgirl Unregistered guest | this is working on fortec ultra but change the name to end with .bin |
|
Silver Member Username: LklivesPost Number: 156 Registered: Jan-06 | this site here Ecoustics will not let us type cetain other site names...so we must insert an asterik or space or something in the other site name and links... COPY AND PASTE INTO YOUR BROWSER, THEN REMOVE THE * IN THE LINKS (C*OM).. Here's the Ultra factory flash: [link removed] here's the repair kit and some more info about the 8888: [link removed]&highlight=black+death |
|
jitrum Unregistered guest | Can anyone tell me how to change keys on a pansat 2500a. Now that we have nag 2. I'm using the 270 flash. |
|
Silver Member Username: LklivesPost Number: 224 Registered: Jan-06 | The 270 has autoroll...the keys will change by themselves automatically...and if U want to know how to manually input the keys,...then READ the thread/topic here " HOW TO INPUT KEYS" !!!!!!!!! |
|
Dishboy Unregistered guest | Lost Hockey Game Channels? Since the bin change and re-scan, some of the channels which have hockey games are nowhere to be found...ca anybody help? Channels: Skdl 1, skdl2, skdl3....are all gone? Any help with this problem would be appreciated! |
|
Silver Member Username: LklivesPost Number: 236 Registered: Jan-06 | Then try another bin,like the 267...there are a ton of bins for the 2500!...and READ the "sports package" topic/thread here.. BTW...try blind scans ,sat scans, TP scans..etc..epecially right before the game starts.. |
|
New member Username: GetsahPost Number: 1 Registered: Jan-06 | Hello, I have a Fortec lifetime ultra (march 2005), and when I downloaded a bin, the system information changes, now it appears Al7barFTADiamond Al7bar_2.76 Boot ver:6.1 10.jan.2006 When I try to download a new bin (Lifetime Ultra_050519_272_api(NTSC)), shows me this message "Flash update fail" Please help me |
|
Unregistered guest | Hi, guys can someone please send me nagra2 black death tool kit file. I have tried the site is always unavailable Thank you in advance |