im going to have 2 RE 12.1's.....should i run one wire from the battery to the amp and then strap it to the other?? or do i still need 2 power wires from the battery..even if the amps are strapped
or
sould i just power each sub with an amp separatly and run two wires from the battery.....and if i do that..how do i do the rca's??
use a disto block, the only way you can strap those amps if if the fianl ohm load is 2ohms. so if you have 2 dual 4 subs you will nbot be able to do it.
you have to consider the subs.... it can not be ran strapped below a 2 ohm load... and runnign a distibution block and 2 short power wirs is what i would do. this way you can run those amps down to a 1ohm load. strapping and bridging is not always the best way to run things.