|
New member Username: Mail4herePost Number: 1 Registered: Nov-05 | Hi I just got one Fortect Ultra lite & trying to set up. Here is my setup. Dish cable,db9( dual LNB) goes to Switch LNB1 (using one cable/connection only) Switch Cable,db9 goes to Reciever Reciver normal coaxial cable goes to TV Fortect Star-2.64 Boot Ver:6.0 Feb 25.2005nt I tried pointing dish to different directions but everytime it says 0 program found. Switch is Digiwav GD-41A DigEqc 2.0 950-2500MHz Echo 6,8 110W Level is usually at 32% ( sometimes 57%) Quality always 0% USing LNB type as standard LNB local freq 11250 22Kz off DisEqc #1 LNB Power as ON TP 12224 V 20.000 positioner setting Disable Satellite scan FTA Do I need to change the factory image to see something ? I am very new to this and really dont know whatis wrong over here. Even tried different combinations but no help. I will appreciate if some one can throw light or direct me to correct web page. Sorry if it is posted before. I couldnot find the answer hence posting this. Thanks in advance |
|
Silver Member Username: ThehitchFla. Post Number: 109 Registered: Oct-05 | Mail4here I am a noob, with limited experience in Viewsat, but your post mentions disq. sw, using 1 sat, I don`t think you need sw. You also, providing you want DN chnls, need to change scan from fta to all, I am out of my league here so in closing I will say there are many step-by-step guides, if you`ll only peruse the posts and select the appropriate one for your fortec and follow the links provided. READ, and good luck. |
|
Silver Member Username: Slo_hand2Post Number: 252 Registered: May-05 | just to add a point may not be much but "NORMAL COAXIAL GOING TO TV" it is recommended that you use "RG6" wire from LBN to reciever. also as hitch pointed out change scan from"FTA to ALL" There are Many people here who have fortex ultras so you should not have a problem getting help from them. BTW have you downloaded the latest bins? |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 580 Registered: Oct-05 | @[link removed] http://www3.telus.net/rampage/skew.htm http://www.remotesat.com/lookangle.htm |
|
372 Unregistered guest | turn 22Kz on change TP setting to get quality signal. |
|
New member Username: Mail4herePost Number: 2 Registered: Nov-05 | txs for your help. I could see fta channels. |
|
Bronze Member Username: PrfrmnjPost Number: 39 Registered: Oct-05 | Mail - Are you still having problems? If so, let me know what you have and have not done so I have an idea of how to help you! |