|
Bronze Member Username: Ford_on_20sJacksonville, Florida Us Post Number: 46 Registered: Nov-05 | im going to get 2 10'' type r's and stick them in a q logic sealed box. im wondering if i need to get the dual 4 ohm or dual 2 ohm subs to run with the alpine mrd 1005 amp |
|
Bronze Member Username: Ford_on_20sJacksonville, Florida Us Post Number: 47 Registered: Nov-05 | anybody ? lol or is there another amp better for 2 type r's? |
|
Silver Member Username: Bga44Tampa Post Number: 139 Registered: Nov-05 | wuts their rms |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 1364 Registered: Jul-05 | 4 ohm so u can wire them down to a 1 ohm load or 4 ohm load, i u got the 2 ohm u could wire them to a 2 ohm or 8 ohm load |
|
Silver Member Username: Bga44Tampa Post Number: 140 Registered: Nov-05 | wut is their RMS, the new ones are 500RMS. the old i think are 350RMS. u need to find a 1000watt RMS amp.look for kicker amps that give 1000RMS in 1 or 2 ohms |
|
Bronze Member Username: Ford_on_20sJacksonville, Florida Us Post Number: 49 Registered: Nov-05 | yea the rms is 500...and here is the specs for tha amp...500W x 1 RMS (4ohm, 12.0V, 1% THD+N) 700W x 1 RMS (2ohm, 12.0V, 1% THD+N) 700W x 1 RMS (4ohm, 14.4V, 1% THD+N) 1.000W x 1 RMS (2ohm, 14.4V, 1% THD+N) |
|
Silver Member Username: Bga44Tampa Post Number: 141 Registered: Nov-05 | get the dual 2ohm subs. and wire it to a 2ohm load. wut amp is it? |
|
Silver Member Username: Bga44Tampa Post Number: 142 Registered: Nov-05 | wut brand amp? u know how to wire it to a 2ohm right? |
|
Bronze Member Username: Ford_on_20sJacksonville, Florida Us Post Number: 50 Registered: Nov-05 | the mrd 1005 |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 1372 Registered: Jul-05 | get the 2 ohm subs since your amp is not 1 ohm stable |
|
Silver Member Username: TjmutlowPost Number: 156 Registered: Sep-05 | Get the 2ohm , and wire them to a 4ohm load, then run series, it will produce 2ohm load |
|
Silver Member Username: Bga44Tampa Post Number: 143 Registered: Nov-05 | go to this site, u put how many subs u have and their impedance and it shows u different ways to wire it and what the ohm will be http://www.cardomain.com/item/KIC04S10L742 go there and then wiring options under specs |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 1375 Registered: Jul-05 | http://www.the12volt.com/caraudio/woofer_configurations.asp |