New member Username: Gsxr1000
Post Number: 2
Registered: Apr-05
|
Posted on DB25 male connector To Pansat JTAG plug
Pin 2 ----------------> 100 ohm resistor ---------------> JTAG Pin 9
Pin 3 ----------------> 100 ohm resistor ---------------> JTAG Pin 11
Pin 4 ----------------> 100 ohm resistor ---------------> JTAG Pin 13
Pin 5 ----------------> 100 ohm resistor ---------------> JTAG Pin 19
Pin 13---------------> 100 ohm resistor ---------------> JTAG Pin 15
Pin 18~25---------------------------------------------------> Pansat GND
What I need to know is the type of ribbon cable. There is a floppy ribbon cable and a IDE ribbon cable, which one is it?
Plus, where is pin 1 located in both the parallel cable and ribbon cable? A layout of how cables are sorted according to their pins can help too.
an example like this will help on both cables:
pin1
pin2 pin8
pin3 pin10
pin4 pin9
pin5 pin7
pin6
*A LAYOUT OF THE PANSAT 2500A IS VERY HELPFUL*
THANKS AGAIN.......... |