|
New member Username: DjeasyPost Number: 1 Registered: Jul-05 | the recommended wire awg and fuse size are 4 awg , 120 fuse, and 20 ft power wire, do i have to get a amp kit that has the following ,because they are hard to find,they are usualy 80 or 60 amp fuse with 17" or 18" power wire |
|
Gold Member Username: CarguyPost Number: 3614 Registered: Nov-04 | Just get a normal amp kit and buy the fuse separately. It shouldn't cost no more than $13 for 5. |
|
Gold Member Username: Suleman36Maryland U.S.A. Post Number: 1615 Registered: Feb-05 | www.knukonceptz.com is where i got my wiring. And i own the same amp J-Dubb. Its gonna be pushing 2 12w6v2's ported to jl specs. What are you pushing with yours ? |
|
New member Username: DjeasyPost Number: 2 Registered: Jul-05 | im thinking about pushing a 15" Kicker L7 ported,or maybe two 12" kicker l7's ported what do you think? |
|
Gold Member Username: Suleman36Maryland U.S.A. Post Number: 1625 Registered: Feb-05 | I think it will get very loud and hit hard / BIG SPL ! Not sure about the SQ with those subs. |
|
New member Username: DjeasyPost Number: 3 Registered: Jul-05 | i just want high spl,would you consider one 15 or 2 12's? also do anyone know if it is possible to wire two dual 4 ohm speakers at 1 ohm? or a single dual 4 ohm speaker to 1,or does the single sub has to be a dual 2 ohm to get lowered to 1,im new to the indepence of ohms, just trying to get the right subs setup for my crossfire vr1000d 1000 rms @ 1 ohms,thanks |
|
Gold Member Username: Suleman36Maryland U.S.A. Post Number: 1629 Registered: Feb-05 | For 2 subs that are dual 4 ohm then yes you can wire it down to 1 ohm to match the impedence of the CrossFire at 1 ohm. For 1 sub that is dual 4 ohm you can wire it to 4 ohm or 2 ohm only. If you want more spl and listen to mostly rap then get the one 15" Kicker L7 |
|
New member Username: DjeasyPost Number: 4 Registered: Jul-05 | So get a dual 2 ohm 15" Kicker l7 with a big ported box, or small? |
|
Gold Member Username: Suleman36Maryland U.S.A. Post Number: 1633 Registered: Feb-05 | Find out by emailing KICKER about what is the recommended size or calling them. Just get a Dual 2 ohm 15" L7 and go ported and you will get plenty of bass. |